Instructions / Assembly

2
□ Normal volume playing time: 6 hours on rechargeable battery; continuously if receiving LV current from the transformer.
□ Bluetooth version: Bluetooth 4.1 □ Omni-directional sound
□ Power supply: AC 12V □ Speaker size: 2.5 inch
□ Speaker power: 8W □ Frequency response: 130～18KHZ
□ Nominal impedance: 4 ohms □ Sensitivity: 83±3 dB
□ Non-removable battery: 3.7V 2200mA □ Bluetooth mode: Support A2DP
General Operating Information
□ Every speaker is preset as the Main Speaker (the toggle S-M switch is preset to M). The speaker can be set as the Main Speaker or a Satellite Speaker by
toggling the S-M switch.
□ This low voltage landscape speaker can be used with your existing low voltage landscape lighting.
□ If operating only one speaker, place the speaker in its permanent location in your yard.
□ To operate multiple speakers, we recommend temporarily connecting all the speakers close to each other. It is easier to pair the speakers when they are
close and you can see the color of the various indicator lights on each speaker. Once the speakers are paired, then you can place them in their permanent
locations in your yard.
□ Connect the speaker(s) to the low voltage cable and the transformer (as instructed on page 1). Once the transformer is ON and sending power to the
speaker(s), look for the Charging Indicator Light:
o If the Charging Indicator Light is illuminated red, then the speaker is receiving power from the transformer and charging.
o If the Charging Indicator Light is illuminated green, then the speaker is fully charged. It takes about 4 hours to fully charge the speaker. The
Charging Indicator Light will remain green so long as the speaker receives power from the transformer.
o If the Charging Indicator Light is not illuminated red or green, then confirm the wire connector (C) is connected to the low voltage cable from the
transformer, and the transformer is turned ON and sending power to the speaker.
□ To stop playing music, turn the music off on your personal music device. You do not need to turn the speaker(s) OFF.
□ The speaker will stay charged if the transformer provides power to the speaker every day. This will ensure the speaker’s battery has power to play music.
□ Do not place the speaker close to a heavy electromagnetic emission device or equipment. This may cause signal interference.
□ If a speaker will not play music or react, simultaneously press the PAIR and the ON/OFF button for 3 seconds to force it to shut off. This will work for either
the Main or Satellite speaker. This will clear out any malfunction and at the same time force the speaker to turn off. To turn the speaker back on, press the
ON/OFF button for approximately 2 seconds until the speaker makes a “Do-Re-Mi” sound (for the main speaker) or a “Di” sound (for a satellite speaker),
and then immediately release the ON/OFF button. Force closing the speaker will not lose the pairing memory between the Main speaker and a Satellite
speaker.
Setting Up and Operating One Speaker
Setting up only one speaker:
□ Toggle the S-M switch to “M”. Add the “M” sticker (E) to the underside of the speaker.
□ To turn the speaker on, press the ON/OFF button for approximately 2 seconds until it makes an ascending “Do-Re-Mi” sound, and then immediately
release the ON/OFF button. The ON/OFF button will flash blue, and the speaker is now in discovery mode and is discoverable by your personal music
device.
□ Follow the instructions on your personal music device to set it to discovery mode. Connect it to the Bluetooth name “LV speaker”. When the speaker is
paired with your personal music device, the blue light will stop flashing and be a solid blue light. The ON/OFF button will remain solid blue so long as it is
connected to your personal music device.
□ Once the speaker and your personal music device are paired, the speaker will play music from your personal music device.
□ NOTE: The Bluetooth pairing distance is 30 ft., so keep the speaker within 30 ft. of your personal music device.
Operating one speaker:
□ The speaker will automatically turn off after 30 minutes if there is no Bluetooth signal detected.
□ To listen to music again, push the ON/OFF button for approximately 2 seconds until the speaker makes an ascending “Do-Re-Mi” sound, and then
immediately release the ON/OFF button. Then, repeat the above steps to reconnect your personal music device to the speaker.
General Notes:
□ Place the speaker at a location where it easy to spot and reach the speaker to turn the speaker on for the next use.
□ In case the speaker does not turn on after pushing the ON/OFF button for approximately 2 seconds, the battery power may be completely drained. In this
case, turn the transformer ON and ensure power is supplied to the speaker. If the speaker’s Charging Indicator Light is red, then the speaker is charging.
After about 5 minutes of receiving power, you will be about to turn the speaker on.
Technical Specifications