SDS

Page 4 of 6
The information and recommendations set forth are made in good faith and believed to be accurate as of the date of preparation.
SHENZHEN BEST ELECTRONICS CO., LTD. makes no warranty, expressed or implied, with respect to this information and
disclaims all liabilities from reliance on it --- File No./Rev.: BKT-MSDS-001/E00
Section 7-Handling and Storage
The battery should not be opened, destroyed or incinerate, since they may leak or rupture and release to the
environment the ingredients that they contain in the hermetically sealed container.
Do not short circuit terminals, or over charge the battery, forced over-discharge, throw to fire. Do not crush or
puncture the battery, or immerse in liquids.
Precautions to be taken in handling and storing
Avoid mechanical or electrical abuse. Storage preferably in cool, dry and ventilated area, which is subject to little
temperature change. Storage at high temperatures should be avoided.
Do not place the battery near heating equipment, nor expose to direct sunlight for long periods.
Other Precautions
The battery may explode or cause burns, if disassembled, crushed or exposed to fire or high temperatures. Do not
short or install with incorrect polarity.
Section 8-Exposure Controls/Personal Protection
Respiratory Protection
In case of battery venting, provide as much ventilation as possible. Avoid confined areas with venting cell cores.
Respiratory Protection is not necessary under conditions of normal use.
Ventilation
Not necessary under conditions of normal use.
Protective Gloves
Not necessary under conditions of normal use.
Other Protective Clothing or Equipment
Not necessary under conditions of normal use.
Personal Protection is recommended for venting battery
Respiratory Protection, Protective Gloves, Protective Clothing and safety glass with side shields.
Section 9-Physical and Chemical Properties
Nominal Voltage：3.2V.
Rated Capacity：1000mAh.
Appearance characters：Silvery-white, cylindrical, odorless, solid battery.
Chemical Uses: Digital electronic products.
Section 10- Stability and Reactivity
Stability
Stable
Conditions to Avoid
Heating, mechanical abuse and electrical abuse.
Hazardous Decomposition Products