Installation Guide

Assembly (continued)

Connecting the long shade rods

Insert the long shade rods (G) into the slots at the ends of the fabric shades (J), through the plastic wheels (E1) and rolling wheel (E2),

into the remaining slots of the fabric shades (J).

Pull the elastic ribbons to the plastic wheel on the side top bar (D), as shown on 11-3 and 11-4.

Attach the long shade rods (G) to the plastic wheels (L1) on the other side top bar (D), and secure with M6x18 countersunk bolts (BB).

Fully tighten all the bolts using the hex wrench (FF).

NOTE:

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

A & B without

magnet iron plate

11-2

11-3

11-1

11-6

11-4

11-5