Item # 1001 531 607 Model # GFM00469A USE AND CARE GUIDE ARCHED GAZEBO Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have p laced in Hampton Bay through the purchase of this .gazebo. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents .......................................................... 2 Safety Information ....................................................... 2 Product Caution .................................................................... 2 Safety Warnings ..................................................................... 2 Warranty ........................................................................ 2 What is Covered ...............................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Three to four adults are required to assmeble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS I E S S L Q S E1 S B L1 E2 D C D F L1 A F B G K A J H R Part Description Quantity Part Description Quantity A Right connector bar 2 H Post 4 B Left connector bar 2 I Protective cover 1 C Lengthways bar 4 J Fabric shade 1 D Side top bar 2 K Magnet iron plate 1 E Center lengthways bar 1 L E1 Plastic center fabric wheel 3 L1 End tip Plastic side fabric wheel 4 8 E2 Steel rolling wheel 1 Q Center tip 2 Po
l Assembly 1 Connecting the connector bar with the magnet iron plate Insert the left connector bar (B) into the right connector bar (A) and secure the connector bars (A & B) with M6x15 combination bolts (AA). Attach the magnet iron plate (K) to the assembled connector bars (A & B) using M6x15 combination bolts(AA). NOTE: Fully tighten all bolts using the hex wrench (FF). A K B AA A B K A B A B AA 5 AA HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 2 Connecting the connector bar Insert the left connector bar (B) into the right connector bar (A), and secure the connector bars (A & B) with M6x15 combination bolts (AA). NOTE: Fully tighten all bolts using the hex wrench (FF).
l (continued) Assembly 3 Inserting the tip Insert the end tips (L) into the side top bar (D). Repeat this step for another side top bar (D). Insert the center tips (Q) into the center lengthways bar (E). Insert the inner tip (S) into the lengthways bar (C). Repeat this step for another three lengthways bars (C). L D L 3-1 L D Q 3-2 E Q Q E S C S S 3-3 C 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 4 Attaching the crossbar Attach the center lengthways bar (E) with the upturned holes to the center of the connector bars (A & B) without the magnet iron plate, using M6x80 combination bolts (DD). Attach the other side of the center lengthways bar (E) to the center of the connector bars (A & B) using M6x15 combination bolts (AA) and M6x80 combination bolts (DD).
Assembly (continued) 5 Attaching the post base plates to the posts Attach the post base plates (R) to the posts (H) using M6x15 combination bolts (AA). Repeat this step for the other three posts (H). NOTE: Loosely tighten all bolts using the hex wrench (FF). R H R H AA 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 6 Attaching the posts to the assembled structure Attach the posts (H) to the assembled structure using M6x15 combination bolts (AA) and M6x80 combination bolts (DD). NOTE: Suggeset two ladders to assemble this step.
Assembly (continued) 7 Attaching the posts to the assembled structure Attach the posts (H) to the assembled structure using M6x15 combination bolts (AA) and M6x80 combination bolts (DD). Once all of the bolts are in place, fully tighten the bolts. NOTE: Suggest two ladders to assemble this step DD D A&B L AA H A & B without magnet iron plate B A D D B A H H H H 11 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 8 Cutting the plastic cable ties Cut the plastic cable ties on the wheels on the top bar (D) and the center lengthways bar (E). NOTE: wheel, others are the plastic wheels. NOTE: The fabric hangers on the side top bar (D) are the plastic wheels.
l (continued) Assembly 9 Inserting the short shade rods into the fabric shade Insert the short shade rods (F) into the top slots of the fabric shade (J). F F J 13 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 10 Attaching the short shade rods Attach the four ends of the short shade rods (F) to the front connector bars (A & B) using M6x35 combination bolts (CC). Pull out the elastic ribbons on the two fabric slot ends, as shown on 4-4.
l (continued) Assembly 11 Connecting the long shade rods Insert the long shade rods (G) into the slot at the end of the fabric shades (J), through the plastic wheels (E1) and rolling wheel (E2), into the remaining slots of the fabric shades (J). Pull the elastic ribbons to the plastic wheel on the side top bar (D), as shown on 6-3 and 6-4. Attach the long shade rods (G) to the plastic wheels (L1) on the other side top bar (D), and secure with M6x18 countersunk bolts (BB).
l (continued) Assembly 12 Installing the protective cover and the ground spikes Attach the protective cover (I) to the side top bars (D) and the center lengthways bar (E) using M6x15 combination bolts (AA). Insert the ground spikes (FF) through the post base plates (R) and into the ground. NOTE: Fully tighten all the bolts using the hex wrench (FF).
l (continued) Assembly 13 Completing the assembly Ensure all connections are secure before use. Care and Cleaning For best results, clean the gazebo with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents. Store the gazebo in a dry, sheltered place when not in use.
l Maintenance 1 Removing the plastic part from top bars Pull out the plastic part at the end of the side top bars (D) and the enter lengthways bar (E) using the hex wrench (GG).
l Maintenance (continued) 2 Replacing the wheels Replace the wheels and lock the plastic part. D L1 DD D L1 x4 E E2 E1 E E E x3 x1 E1 E2 19 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
