Item # 1001 531 607 Model # GFM00469A USE AND CARE GUIDE ARCHED GAZEBO Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have p laced in Hampton Bay through the purchase of this .gazebo. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents.......................................................... 2 Safety Information ....................................................... 2 Product Caution .................................................................... 2 Safety Warnings ..................................................................... 2 Warranty ........................................................................ 2 What is Covered ................................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Need three to four persons to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. BB AA FF DD CC EE GG Part Description Quantity AA M6x15 bolt 49+1 BB CC DD EE FF GG M6x18 countersunk bolt M6x35 bolt M6x80 bolt Washer Ground spike Hex wrench 8+1 4+1 26+1 79+1 16+1 2 3 HAMPTONBAY.
Pre-Assembly (continued) PACKAGE CONTENTS I S E Q B E1 L C L1 D F L1 A A F G B K J H R Part Description Quantity Part Description Quantity A Right connector bar 2 I Protective cover 1 B Left connector bar 2 J Fabric shade 1 C Lengthways bar 4 K Magnet iron plate 1 D Side top bar 2 L End tip 4 E Center lengthways bar 1 E1 Center fabric hanger 4 L1 Q Side fabric hanger Center tip 8 2 F Short shade rod 2 R Post base plate 4 G Long shade rod 4 S
l Assembly 1 Connecting the connector bar with the magnet iron plate Insert the left connector bar (B) into the right connector bar (A) first, then secure the connector bars (A & B) with M6x15 bolts (AA) and washers (EE). Attach the magnet iron plate (K) to the assembled connector bars (A & B) using M6x15 bolts (AA) and washers(EE). NOTE: Fully tighten all bolts using the hex wrench (GG). A K B A AA EE K B A B A B AA EE 5 EE AA HAMPTONBAY.
l (continued) Assembly 2 Connecting the connector bar Insert the left connector bar (B) into the right connector bar (A), then secure the connector bars (A & B) with M6x15 bolts (AA) and washers (EE). NOTE: Fully tighten all bolts using the hex wrench (GG).
l (continued) Assembly 3 Insert the tip Take out the foam blocks in the side top bar (D). Insert the end tips (L) into the side top bar (D). Repeat this step for another side top bar (D). Take out the foam blocks in the center lengthways bar (E), and insert the center tips (Q). Insert the inner tip (S) into the lengthways bar (C). Repeat this step for another three lengthways bars (C). L D L 3-1 D L foam block D Q E 3-2 Q Q E E foam block S C S S 3-3 C 7 HAMPTONBAY.
l (continued) Assembly 4 Attaching the crossbar Attach the center lengthways bar (E) with the hole side to the center of the connector bars (A & B) without the magnet iron plate, using M6x80 bolts (DD) and washers (EE). Attach another side of the center lengthways bar (E) to the center of the back connector bars (A and B) using M6x80 bolts (DD), M6X15 bolts (AA) and washers (EE). Attach the lengthways bar (C) to the assembled connector bars (A & B) using M6x80 bolts (DD), M6X15 bolts (AA) and washers (EE).
l (continued) Assembly 5 Attaching the post base plates to the posts Attach the post base plates (R) to the posts (H) using M6x15 bolts (AA) and washers (EE). Repeat this step for another three posts (H). NOTE: Loosely tighten all bolts using the hex wrench (GG). R H R H EE AA 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 6-1 Attaching the posts to the assembled structure Attach the posts (H) to the assembled structure using M6x15 bolts (AA), M6x80 bolts (DD), and washers (EE). NOTE: Suggest two ladders to assemble the posts.
l (continued) Assembly 6-2 Attaching the posts to the assembled structure Attach the posts (H) to the assembled structure using M6x15 bolts (AA), M6x80 bolts (DD), and washers (EE). Once all bolts are in place, fully tighten all the bolts. NOTE: Suggest two ladders to assemble the posts. DD EE EE D A&B AA B A L H D B A D H H H H 11 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 7 Inserting the short shade rods into the fabric shade Insert the short shade rods (F) into the top slots of the fabric shade (J).
l (continued) Assembly 8 Attaching the short shade rods Attach the four ends of the short shade rods (F) to the front connector bars (A&B) using M6x35 bolts (CC) and washers (EE). Pull out the elastic ribbons on the two fabric slot ends. 4-1 B 4-3 E B A EE EE F EE CC CC F F CC A&B J J F A F 4-4 CC EE 4-2 13 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 9 Connecting the long shade rods Insert the four long shade rods (G) through the half-slot, through the center fabric hangers (E1), through the rest half-slot. Pull the elastic ribbons to the pastic wheel on the side top bar (D). Secure the long shade rods (G) with M6x18 countersunk bolts (BB). Fully tighten all the bolts with the hex wrench (GG).
l (continued) Assembly 10 Installing the protective cover and the ground spikes Attach the protective cover (I) to the side top bars (D) and the center lengthways bar (E) using M6x15 bolts (AA) and washers (EE). Insert the ground spikes (FF) through the post base plates (R) and into the ground. NOTE: Fully tighten all the bolts with the hex wrench (GG). AA AA EE EE I I E D I H R FF 15 FF FF FF HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 11 Completing the assembly Ensure all connections are secure before use. Care and Cleaning For best results, clean the gazebo with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents. Store the gazebo in a dry, sheltered place when not in use.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
