Instructions / Assembly

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
3ea Socket Sleeves (#5) 1ea Hex Nut (#8)
1ea Nipple (#9)
1ea Shade (#10) 1ea Bottom Cover (#11) 1ea Finial (#12)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Place the three Socket Sleeves (#5) over the three Sockets (#6).
3. Install three 60 watt candelabra incandescent light Bulbs (#4) (not included)
or three equivalent candelabra compact fluorescent light bulbs (not included)
in the three Sockets (#6).
4. Screw the shorter end of the Nipple (#9) into the Bushing (#7) until the Hex
Nut (#8) is secure against the Bushing (#7). Place the Shade (#10) and then
the Bottom Cover (#11) over the Nipple (#9). Screw the Finial (#12) onto the
Nipple (#9) to secure them into place.