Instructions / Assembly

4 HAMPTONBAY.COM.

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly

Attaching the Back and Seat

Attaching the Handrails(Left)

 Connect the Back (B) with Seat (C) using Bolt (AA), spring

washer (BB) and washer (CC). Use wrench (DD) to loosely

tighten the bolts.

NOTE: Do not fully tighten the bolts.

 Insert the hole on the Handrail (A2) on the bolt on the side of

Back (B). Move the Handrail (A2) back and forwards and

adjust the angle if you find difficult to insert the hole

 Swivel forward the Handrail (A2) to be level with the Seat

(C).

NOTE: Adjust the angle if you find difficult to insert

the hole

Attaching the Handrails(Left)

Attaching the Handrails

(Right)

 Align the back (B) with the mounting holes in the

Handrail (A2), connect them using Bolts (AA), spring

washer (BB) and washer (CC). Use wrench (DD) to

loosely tighten the bolts.

 Connect the Seat (C) with the Handrail (A2) using bolts

(AA), spring washer (BB) and washer (CC). Use

wrench (DD) to loosely tighten the bolts.

NOTE: Do not fully tighten the bolts. Lightly rotate the

armrest during installation.

 Inset the hole on the Handrail (A1) on the bolt on the

side of Back (B). Move the Handrail (A1) backwards and

adjust the angle if you find difficult to insert the hole.

 Swivel forward the Handrail (A1) to be level with the

Seat (C).

NOTE: To avoid destroying the finish, do not put the

parts on the ground directly.