Instructions / Assembly

Dimming

Although this product is compatible with most common residential type dimmers, dimming

performance depends on dimmer, dimmer setting (for dimmers with brightness range adjustments),

wiring method, and the number of LED modules. For best results, set dimmer position at maximum

before adjusting to a lower light level.

For a complete list of compatible dimmers, please look up the item number listed on the cover of this

instruction manual at http://www.homedepot.com/.

FCC Notice

NOTICE: This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. However, there is no guarantee

that interference can be determined by turning the equipment off and on. The user is encouraged to

try to correct the interface by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the device and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

Troubleshooting

Problem

Solution

The light will not turn on.

 Make sure the power supply is on.

 Test or replace the switch.

 Check the wiring.

 Replace the driver.

The fuse blows or circuit breaker trips

when the light is turned on.

 Check the wire connections.