Instructions / Assembly

1
Attaching the mounting bracket
 Thread the fixture screws (FF) into the provided holes of the
mounting bracket (GG).
 Thread the hex nuts (CC) onto the fixture screws (FF). Do
not tighten the hex nuts (CC) at this time.
 Pull the supply wires out from the outlet box and mount the
mounting bracket (GG) to the outlet box using the bracket
mounting screws (EE).
 Place the canopy (A) over the outlet box and onto the fixture
screws (FF).
 Adjust the fixture screws (FF) until they protrude out from
the canopy (A) 1/4 in.
 Remove the canopy (A) and secure the position of the
fixture screws (EE) by tightening the hex nuts (CC) against
the mounting bracket (GG).
5
2
Securing the socket
 Feed the fixture wires from the socket (C) through the
shade (B), through the collar (DD), and through the canopy
(A).
 Place the shade (B) over the socket (C). Screw the collar
(DD) onto the top of the socket (C).
 Screw the components together until they are secured and
do not come loose.
Installation
A
B
C
DD
EE
GG
FF
CC
HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.