Manualshelf

Instructions / Assembly

ManualsBrandsHampton Bay ManualsDeck Lighting3-Watt Architectural Black Integrated LED Deck Light
1234567
1
Use and Care Guide
LED LOW VOLTAGE
SURFACE MOUNT LIGHT
PACKAGE CONTENTS
A – Fixture x1 C – Wire Connector (with 36 in. wire) x1 AA – Self-Threading BB – Plastic CC – Cardboard
B – Female Plug (with 12in. wire) x1 D – Male Plug x1 Screw (40 mm) x2 Anchor (25 mm) x2 Template x1
Assembly and Installation
1
Installing the fixture with the wire routed behind the mounting
surface
1
NOTE: This document provides two different methods for routing the
lead wire. You can chose which method best fits your needs.
□ Place the cardboard template (CC) on the mounting surface and mark where
the holes should be for the female plug (B) and the self-threading screws (AA).
□ Use at least a 7/16 in. drill bit to drill a hole on the surface large enough
for the female plug (B) to pass through the hole on the mounting surface.
□ Insert the female plug (B) through the hole on the mounting surface.
□ Insert the male plug (D) into the female plug (B).
□ Place the fixture (A) against the mounting surface.
□ Use a Phillips screwdriver to screw the self-threading screws (AA) through the
two holes on the fixture (A) to secure the fixture (A) to the mounting surface.
□ Place the cardboard template (CC) on the mounting surface and
mark where the holes should be for the self-threading screws (AA).
□ Insert the male plug (D) into the female plug (B).
□ The wire plugs may be retained inside the back of the fixture (A) by
coiling the wire and plugs and dropping the wire through the notch in
the bottom of the fixture (A).
Or
□ The wire plugs may be left outside the fixture (A) by dropping the wire
through the notch in the bottom of the fixture (A) with the plugs
outside the back plate when the fixture is mounted. The connected
plugs are waterproof.
□ Place the fixture (A) against the mounting surface.
□ Use a Phillips screwdriver to screw the self-threading screws (AA)
through the two holes on the fixture (A) to secure the fixture (A) to the
mounting surface.
Item #1002 669 230
Model #JAO1691L

Summary of content (7 pages)