Instructions / Assembly
Table Of Contents
- CONTENIDO DEL
- WHAT IS COVERED
- WHAT IS NOT COVERED
- Pre-Installation
- Planning Installation
- Tools Required
- Hardware included
- Pre-Installation (continued)
- Package Contents
- LO QUE ESTA CUBIERTO
- LO QUE (NO) ESTA CUBIERTO
- Pre-Instalatión
- PLANIFICACIÓN DE LA INSTALACIÓN
- HERRAMIENTAS NECESARIAS
- REQUIERE DE HARDWARE
- Pre-Instalación (continuación)
- CONTENIDO DEL PAQUETE
- CE QUI EST COUVERT
- CE QUI EST COUVERT (ET PAS)
- Pré-Installation
- PLANIFICATION DE L'INSTALLATION
- OUTILS REQUIS
- MATERIEL inclus
- Pré-Installation (suite)
- CONTENU DE L'EMBALLAG
7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation (continued)
7
Installing bulbs
□ Screw five 60-Watt maximum, incandescent
medium-base bulbs (not included) into the sockets
(F).
NOTE: You can use LED equivalent energy-saving
bulbs that do not exceed 8 Watts each (not included).
Care and Cleaning
□ Clean the fixture with a soft, dry cloth.
□ Do not use any cleaners with chemicals, solvents or harsh abrasives.
WARNING: Before attempting to clean the fixture,
disconnect the power to the fixture by turning the
breaker off or removing the fuse from the fuse box.
Troubleshooting
Problem
Possible Cause
Solution
The bulb will not light.
The power is off.
Ensure the power supply is On.
The circuit breaker is off.
Ensure the circuit breaker is in the On position.
The fuse blows or circuit
breaker trips when the light is
turned on.
Crossed wires or power
wire is grounding out.
□
Check the wire connections.
□ Contact a qualified electrician or call the
Customer Service Team at
1-855-HD-HAMPTON.