Product Manual

C1000 - User Guide Rev: 9SEP2011 Page: 20
LCD Display Functionality
In any ‘Default display mode’, if the unit is in the charger the lift will go into Charging Display
Mode regardless what the user has selected as ‘Default Display Mode’. Charging Display Mode
will over-ride Low Battery Mode.
The lift will then:
7. Display a flashing “Charging” with the percentage charged (in 10% increments) in the
top row of the display (e.g., “Charging 60%”).
8. Show the appropriate number of fully blackened out cells, with the remaining cells in the
bottom row flashing.
Preventative Maintenance
Preventative maintenance should be completed every six (6) months. The lift should recommend
preventative maintenance if it hasn’t had any preventative maintenance for:
1. 1,000 lifts (four or five lifts a day for 180 days); or,
2. Five (5) hours of accumulated usage time.
When recommend preventative maintenance, the lift will:
9. Beep one (1) time every thirty (30) minutes
10. Flash “Maintenance” in the first line of the display (regardless of which default display
mode the user has selected).
To reset the PM lifts counter:
1. The lift must be in power off state.
2. While pressing both Up/Down buttons on hand control, turn “ON” lift. A minimum of 10
seconds must pass followed by a beep to indicate completion of the reset.
3. PM lifts count will be “zero”.
4. Use lift as normal.
M a i t e nn a n c e
Flashing