Product Manual

Free Standing Track - User Guide Part#633282 Rev: 05/01/2012 Page: 15
Step 5 - Track should fall into place and sit flat on the track
holder of the Post as you see in next figure.
Step 4 - lift the track with both hands and Place one end of
the track on the Post Assembly as shown in figure.
Note: always make sure that handles are in
open position before placing the track on the
post.
Step 6: Place the other end of the track on the other
Post.
Note: Make sure there is no gap between
the Track and Track Holder.
Step 7— Both ends should lay completely Flat on the
top of post assemblies.
Assembly—Mounting the Track
No Gap