Product Manual

Free Standing Track - User Guide Part#633282 Rev: 05/01/2012 Page: 4
General Placement
Trolley
Side Support
Assembly
Track
Photo showing Side View and the general placement of a bed in
relationship to the Free Standing Track.
Foot
General Placement Requirements
1) The Bases of the Free Standing Track must always be placed on a hard level surface.
2) Do not place the Bases on surfaces that will cause them to wobble or be unstable. Make sure the surfaces
are free of any obstacles that may cause the Bases to be unstable.
3) Never place the Bases on wet surfaces.
4) Assemble the Free Standing Track so that the Track is directly over the location where the transfer will
occur. For beds this is generally between 39” - 45” (1000mm - 1145mm) from the head of the bed. For
wheelchairs, living room chairs, recliner chairs and similar furniture this is directly above the middle
(center) of the seat.
Portable
Lift