Product Manual

Free Standing Track - User Guide Part#633282 Rev: 05/01/2012 Page: 9
Cleaning Rubber Feet :
Prior to each installation, clean the rubber feet with wet cloth soaked with water.
Clean all 8 Rubber pieces. Wipe off the
dirt with a wet cloth as shown in picture.
Note:
After cleaning, Make sure the rubber feet
are clean and dry with no residue of dirt or
dust left on them.
Also, ensure Floor area is cleaned and free
of dirt & debris.
Caution: Before using the Free Standing Track,- the Post assembly and track must be visually
checked to ensure that they are not damaged. Should anything look unusual contact your local
dealer prior to use.
Failure to comply with this caution could result in serious injury to the operator, the individual being
lifted and/or damage to the Free Standing Track and/or portable lift unit.
Assembly