Specification

*DISCLAIMER: Descriptions regarding the products described herein are based solely upon information provided by the manufacturer and are
provided for informational purposes only. NOTHING CONTAINED HEREIN SHOULD BE CONSTRUED AS CREATING AN EXPRESSED OR
IMPLIED WARRANTY, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, EACH OF WHICH IS HEREBY DISCLAIMED.
THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. The final determination as to the
suitability of any product of Hanes Geo Components in any particular application rests solely with the user. Hanes Geo Components reserves the
right to alter or modify its products and descriptions at any time without notice.
2014-06-01
Silt Fence 3604-D48-C System
(Product # 76162)
Hanes Geo Components preassembled Silt Fence 3604-D48-C System is a preassembled silt fence with
TerraTex GASF-C woven monofilament geotextile, stapled to hardwood stakes, 4 feet on center.
Assembled Fence Characteristics
Silt Fence Geotextile
TerraTex GASF-C
Geotextile Height / Length
36 in (0.914 m) x 100 ft (30.5 m)
Post Spacing
4 feet (1.22 m)
Post Height
48 inches (1.22 m)
Post Composition
Common Hardwood
Post Size
“D” 2 in x 2 in
Fence Assembly
5 -16g Galvanized Staples/post
Lathe / Support netting or wire
36 in Plastic netting stitched to fabric
The TerraTex GASF-C is made up of polypropylene monofilaments. These monofilaments are woven to
form a stable and durable network such that the filaments retain their relative position. It is non-
biodegradable and resistant to most soil chemicals, acids, and alkali with a pH range of 3 to 12. TerraTex
GASF-C is manufactured to meet or exceed AASHTO M288 supported and unsupported silt fence fabric
requirements and the following minimum average roll values:
Silt Fence Geotextile Properties
Minimum Average
Minimum Average
Roll Value
Roll Value
Property
Test Method
English
Metric
Grab Tensile MD
ASTM D-4632
300 lbs
1.334 kN
Elongation MD
ASTM D-4632
15 %
15 %
Grab Tensile XMD
ASTM D-4632
260 lbs
1.156 kN
Elongation XMD
ASTM D-4632
15 %
15 %
UV Resistance
ASTM D-4355
90% @ 500 hr
90% @ 500 hr
AOS*
ASTM D-4751
40 US Sieve
0.60 mm
Permittivity
ASTM D-4491
0.25 sec
-1
0.25 sec
-1
Flow Rate
ASTM D-4491
70 gal/min/ft
2
2852 L/min/m
2
* Maximum Average Roll Value
5/2014