Instructions / Assembly

Open bag from the drawstring opening (not the velcro end),

gently pull the cover out.

Feed the metal ring of the Pod through the boom of

the Cover, and through the opening at the top of the

built-in bag.

Hang via exposed metal ring & drape fabric around the

Pod.

Zip closed. Ensure the zip is centrally posioned within

the wide entrance of the Pod, and the string-es inside

the Cover align with the Pod ropes.

Fasten buon over zip & pull the drawstrings ght. Store addional rope in the small pockets on either side of zip.

Net & Pod Cover

ASSEMBLY

INSTRUCTIONS

www.hangoutpod.com

PAGE 1
Net & Pod Cover ASSEMBLY INSTRUCTIONS 1 Open bag from the drawstring opening (not the velcro end), gently pull the cover out. 2 Feed the metal ring of the Pod through the bottom of the Cover, and through the opening at the top of the built-in bag. 3 Hang via exposed metal ring & drape fabric around the Pod. 4 Zip closed. Ensure the zip is centrally positioned within the wide entrance of the Pod, and the string-ties inside the Cover align with the Pod ropes.
PAGE 2
Net & Pod Cover CARE, SAFETY & WARRANTY IMPORTANT Please read & retain instructions to ensure safe use & warranty. CARE INSTRUCTIONS Not designed to be set up outside permanently. Store or pack away in between uses. During periods of inclement weather of any kind, dry all elements and pack or stow away to avoid damage, injury, wear and tear and voided warranty Always ensure all elements are packed away COMPLETELY DRY. Clean Cover using a damp cloth only. Line Dry / Hang to dry. Do not bleach.