Helmet Camera Quick Start Guide
English English © 2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/).
English RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
English of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
English Directive 2006/66/EC and its amendment 2013/56/EU (Battery Directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.
English Safety Instructions Use of the product must be in strict compliance with the local laws and regulations. Please shut down the device in prohibited area. ⚫ Use of the product must be in strict compliance with the local electrical safety regulations. ⚫ Use the power adapter provided by qualified manufacturer. Refer to the product specification for detailed power requirements.
English DO NOT touch the heat dissipation component to avoid burns. DO NOT expose the device to extremely hot, cold, or humidity environments. For temperature and humidity requirements, see device specification. ⚫ No naked flame sources, such as lighted candles, should be placed on the equipment. ⚫ DO NOT touch the sharp edges or corners. ⚫ To prevent possible hearing damage, DO NOT listen at high volume levels for long periods.
English DO NOT aim the lens at the strong light such as sun or incandescent lamp. The strong light can cause fatal damage to the device. ⚫ DO NOT charge the battery continuously more than one week. Overcharging may shorten the battery life. ⚫ Battery will discharge gradually if it is not used for a long time. It must be recharged before using. ⚫ If the device contains dismountable battery, store the device and battery separately if it is not used.
English ⚫ ⚫ downloading. Or files may be damaged. The USB interface is not allowed to charge other devices or connect to other loads. The laser radiation emitted from the device can cause eye injuries, burning of skin, or inflammable substances. Before enabling the laser, make sure no human or inflammable substances are in front.
English Introduction Little AI Helmet Camera (hereinafter referred to as device) is a highly integrated camera with small volume and light weight. The device is applicable for working condition where workers need to wear helmet. The device supports functions like picture taking, video recording, local storage, mobile network transmitting and GPS and Beidou Positioning. ⚫ Supports H.265 and H.264 video compression standards. ⚫ Supports live view, short delay and low bit rate mode.
English No. 1 Name Loudspeaker Outlet Hole Description Playing Sound Opening side plug. The Type-C interface can connect with 2 Side Plug data cable to transmit date and charge device. You can insert a TF card into the TF card slot. 3 4 Operation Green light keeps on: The Indicator device is operating normally。 Camera Taking pictures. When in startup status, 5 White-light Source pressing on/off button shortly to turn on white-light source to compensate light for taking picture.
English 9 10 11 Power button Back gule Screw Camera button 12 Alarm button 13 on/off the laser light. Danger: After the laser light is on, please avoid looking at the laser directly or it will damage your eyes. Hold it to turn on/off the device. Used to gule the device to a helmet. Used to fix the device and bracket. In the startup status, press the camera button once to capture a picture. Press press the camera button twice to enable the Wi-Fi AP, and press it twice again to disable the Wi-Fi AP.
English 12
