1S ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE
What's in the box Please consult this checklist for all parts.
Status light SD card slot Reset Speaker Power Microphone Note: When you need to insert or pull out the SD card, you need use a Pin to complete it. Description Power DC5V±10% Status light Red light solids on: the camera network is abnormal Blinking red light: awaiting WiFi connecting Blue light solids on: camera running correctly Blinking blue light: currently connecting Microphone Captures sounds for your video SD card slot Supports local SD Card storage (Max.
Install 1 Stick the adhesive tape in the middle of camera bottom 2 Put the camera on the clean plane 3
Connect Download Smart Life is available for both iOS and Android OS. Rearch the name 'Smart Life'in App Store or Android Market, or scan the QR-Code to download the App. ·Support IOS Android Dowoload App(IOS&android) Set up router This device only supports 2.4GHz frequency band router, does not support 5GHz frequency band router, please set the relevant parameters of the router before WiFi configuration, WiFi passwords do not include special characters such as ~!@#$%^&*().
Registration process Step 1 Open the Smart Life App, click "Register", read the "Privacy Policy" and click "Agree" . Step 2 input a legal and valid Mobile number or Email address and click "Continue". Input Verification Code, then log in the app.
QR Code Configuration 1 Open the Smart Life App, click "Create family", and you can customize the Family name and related settings . 2 Continue to click "Security & Sensor" >> "Smart Camera",and then choose "Add Device" or "+",ready to add camera.
3 In "Add Device" this interface,continue to click "next step",and then you should input your WiFi's passwords. Note: 1) Camera only supports 2.4GHz WiFi network. 2) The number of bits in the ssid and passwords of the router should not exceed 24 digits.
4 In this interface,you should scan the QR code in your phone with the camera,when the camera comes out "dong dong dong". And you can complete the configuration about 30s.
5 When connecting,you should make sure your router,mobile,and camera are as close as possible.When camera added successffully,click " " you could also DIY the camera's name.
Settings In "Smart Camera" interface,click " ",you can set the camera common functions.
FAQ Q: The camera cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, if not, it is better to reset the camera and add it again. Q: Why is it still in the list of devices after reseting? A: The reseted camera only resets the network configuration of the camera, but cannot change the configuration in the App, remove the camera in your account,need to add again.
Functions Video flip Flip your video stream vertically anytime for maximum flexibility. Motion detection Motion sensors will notify you when movement is detected. Record Record every moment using high capacity SD card storage or Cloud Storage. Day & Night Powerful night vision means no interruptions, even in complete darkness.
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
