Operation Manual

WISEreader N516 English
This will extend the Lithium battery life.
File Management
Connected to computer
When the device is power-on, connect it to the
computer with the USB data wire. At that moment, the
computer will automatically detect a new storage device
connecting.
Select “Data transmission”, and then press OK button
to confirm, the device will enter the connecting status.
Note: The SD card can be taken out from the device
and insert it into a compatible card reader. Connect it to
the computer USB port; it can be used like a common
USB flash driver.
The current format of all these electronic books
saved in the device is HTXT, they adapt the current
device’s ID code, and they were encrypted already. Thus,
those books can’t be read at the other devices and also
cannot be opened and edited on PC.
File copying
Please do not rename, remove or delete the