Product manual
SKU 99823 For technical questions, please call 1-800-444-3353. Page 3
Electrical Safety
1. To protect against
electrical shock do not
immerse cord, plugs, or
the main unit in water or
other liquid. Only the
non-electrical parts of the unit may be
immersed for cleaning. Thoroughly
clean and dry these parts prior to rst
use and before every subsequent
use.
Unplug from outlet when not in use 2.
and before maintenance or cleaning.
Do not operate any tool with a 3.
damaged cord or plug or after the tool
malfunctions or has been damaged
in any manner. Return tool to the
nearest authorized service facility for
examination, repair, or adjustment.
This Electric Sharpener has a 4.
polarized plug (one blade is wider
than the other). To reduce the risk of
electric shock, this plug is intended
to t into a polarized outlet only one
way. If the plug does not t fully
in the outlet, reverse the plug. If it
still does not t, contact a qualied
electrician. Do not change the plug in
any way.
Do not use this product in a damp or 5.
wet location.
Do not clean with metal scouring 6.
pads. Metal pieces can break off
the pads and touch electrical parts
involving risk of shock.
Power Cord Safety
1. A short power supply cord is to be
provided to reduce risks resulting
from becoming entangled in or
tripping over a longer cord.
2. Longer extension cords are available
and may be used if care is exercised
in their use.
3. If a long extension cord is used,
the marked electrical rating of the a.
(detachable power supply cord or)
extension cord should be at least as
great as the electrical rating of the
tool,
if the tool is of the grounded type, b.
the extension cord should be a
grounding type 3-wire cord, and
the longer cord should be arranged c.
so that it will not drape over the
counter top or tabletop where it can
be pulled on by children or tripped
over.
General Safety
The use of accessory attachments 1.
not recommended by the tool
manufacturer may cause injuries.
To disconnect, turn any control to 2.
“off”, then remove plug from wall
outlet.
Do not use tool for other than 3.
intended use.
Maintain labels and nameplates on 4.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Do not store anything other than 5.
the manufacturer’s recommended
accessories in this unit when not in
use.