FAQ

Unfinished Butcher Block - Your unfinished block needs to be finishing within 24 hours of opening
the shrink wrap, as stated on the Home Depot website. This is to prevent warping and cracking. If you
were unaware of this and have already opened your block, and are not able to finish at this time, please
store the block lying flat and cover with something to prevent drying out. A blanket will do nicely.
You will begin by sanding your block, moving with the grain, to a 320 grit, making the block smooth.
You may add stain next. Please note that stain is not a necessity. It only changes the look of the block and
has no sealing properties. If you choose to stain, please allow the stain to fully cure before sealing your
block.
To seal your block, you will choose either an oil or a polyurethane/lacquer. You will never need both.
Research the pros and cons of these options to find the product that fits your needs. Following the
directions of the product you choose, apply to the block on ALL SIX SIDES, creating a seal. Sanding
between coats may be necessary. Always, ALWAYS follow the directions on the products you choose.