Owner's manual

7 FRONT-PANEL INFORMATION DISPLAY
Front-Panel Information Display
SLEEP TUNED
STEREO
AUTOMONO PRESET
SURR. OFF
MUTE
PCM THEATER
HALL 2HALL 1
3
- STEREOPRO LOGICDIGITAL
COAX
OPT
12
ANALOG
NIGHT
MULTI
MEMORY
A
B
C
D
EG
N
O
K
M
L
WTUSRQPV
F
H
I
J
A Coax Source
B Digital Source Input Number
C Optical Source
D Analog Source Indicator
E PCM Indicator
F Dolby Digital Indicator
G Analog Dolby Surround Mode Indicators
H Hall Mode Indicators
I Theater Mode Indicator
J DTS Mode Indicator
K Surround Off
L Multiroom System Indicator
M Night Mode Indicator
N Preset Number
O Preset Indicator
P Memory
Q Auto
R Mono Indicator
S Stereo Indicator
T Tuned Indicator
U Main Information Display
V Sleep Indicator
W Mute
A Coax Source: This indicator illuminates
when a digital source is in use via a connection
to the Coaxial Digital inputs e.
B Digital Source Input Number: These
indicators tell you which of the two digital
inputs is selected.This indicator works in con-
junction with the Coax Source A and
Optical Source C indicators to show which
form of digital signal is in use.
C Optical Source: This indicator illuminates
when a digital source is in use via a connection
to the Optical Digital input d.
D Analog Source Indictor: This indicator
illuminates when an analog input source is in use.
E PCM Indicator: This indicator illuminates
to show that a standard PCM (S/P-DIF) digital
audio signal is being decoded by the digital-to-
analog converter.
F Dolby Digital Indicator: This indicator
illuminates when a Dolby Digital source is
being played.
G Analog Dolby Surround Mode
Indicators:These indicators illuminate when
one of the analog (matrix) Dolby Surround
modes is in use.
H Hall Mode Indicators: One of these indi-
cators illuminate when either of the Hall modes
are in use.
I Theater Mode Indicator: This indicator illu-
minates to show that the Theater mode is in use.
J DTS Mode Indicator: This indicator illumi-
nates when a DTS-encoded source is playing.
K Surround Off: This indicator illuminates
when the surround processing has been dis-
abled by pressing the Surround Off button
Ù.When this indicator is lit, the AVR 300 will
play traditional stereo sound using the front-left
and front-right speakers only.
L Multiroom System Indicator:This indica-
tor illuminates when the multiroom system is in
operation.(See page 26 for more information
on the multiroom system.)
M Night Mode Indicator: This indicator
lights when the AVR 300 is in the Night mode,
which preserves the dynamic range of digital
program material at low volume levels.
N Preset Number: This two-digit display
indicates the station preset number that is
currently in use, or that is being entered.
O Preset Indicator:This indicator illuminates
when a station previously entered into the preset
memory is tuned.The number that appears below
the indicator is the preset station’s memory.
P Memory: This indicator flashes when
entering presets and other information into the
tuner’s memory.
Q Auto: This indicator illuminates when the
Auto mode is in use for FM tuning.
R Mono Indicator: This indicator illuminates
when the tuner has been placed in the monaural
mode by pressing the Tune Mode button *.
Set the tuner for mono listening to reduce noise
and improve the quality of distant stereo signals.
S Stereo Indicator: This indicator illuminates
when an FM station is being tuned in stereo.
T Tuned Indicator:This indicator illuminates
when a station is being received with sufficient sig-
nal strength to provide acceptable listening quality.
U Main Information Display: This display
shows messages relating to the status, input
source, surround mode, tuner,volume level or
other aspects of unit’s operation.
V Sleep Indicator: This indicator is illumi-
nated when the Sleep function is in use.The
number that appears above the indicator is
the number of minutes remaining before the
AVR 300 will return to the Standby mode.
W Mute: This indicator illuminates to remind
you that the AVR 300’s output has been
silenced by pressing the Mute button ı .
Press the Mute button again to return to the
previously selected output level.
31