Operation Manual

FRONT-PANEL INFORMATION DISPLAY
REAR-PANEL INFORMATION DISPLAY 7
MEMORY PRESET
SLEEP
AUTO
MUTE T-MON
TUNED ST
AB
DE
F
H
I
J
C
G
A Preset Number/Sleep Timer
B Preset Indicator
C Sleep Indicator
D Memory Indicator
E Stereo Indicator
F Tuned Indicator
G Auto Indicator
H Main Information Display
I Tape Monitor (T-Mon) Indicator
J Mute Indicator
A Preset Number/Sleep Timer: When the tuner is
in use, these numbers indicate the specific preset
memory location in use. (See page 15 for more infor-
mation on preset stations.) When the Sleep function is
in use, these numbers show how many minutes
remain before the unit goes into the Standby mode.
B Preset Indicator: This indicator lights when the
tuner is in use to show that the
Preset Number/
Sleep Timer
A is showing the station’s preset
memory number. (See page 15 for more information
on tuner presets.)
C Sleep Indicator: This indicator lights when the
Sleep function is in use.The numbers in the Preset
Number/Sleep Timer Indicators will show the minutes
remaining before the HK 3375 goes into the Standby
mode. (See page 14 for more information on the
Sleep function.)
D Memory Indicator: This indicator flashes when
entering presets and other information into the tuner’s
memory.
E Stereo Indicator: This indicator lights when an FM
station is being tuned in stereo.
F Tuned Indicator: This indicator lights when a sta-
tion is being received with sufficient signal strength to
provide acceptable listening quality.
G Auto Indicator: This indicator lights when the
tuner’s Auto mode is in use.
H Main Information Display: This display shows
messages relating to the status, input source, tuner or
other aspects of the HK 3375’s operation.
I Tape Monitor (T-Mon) Indicator: When used
with three-head cassette decks, or other recording
devices that offer immediate playback of the recording
as it is being made, the HK 3375 allows you to moni-
tor a recording rather than merely listening to the input
source, or waiting until the recording session is com-
plete in order to hear the recording. Press the
Tape
Monitor Input Selector
9ç, and the T-Mon
Indicator
I will light to remind you that you are
monitoring the recording. Press the
Tape Monitor
Input Selector
9ç again to hear the input source.
J Mute Indicator: This indicator lights to remind
you that the HK 3375’s output has been silenced by
pressing the
Mute button 5®. Press the Mute
button again to return to the previously selected
output level.