Operation Manual

ManualsBrandsHarman Kardon ManualsAudioHK3475

REMOTE CONTROL FUNCTIONS 11

REMOTE CONTROL FUNCTIONS

å Main Power On: When the HK 3475 is in the

Standby mode, as indicated by the Power Indicator

3 glowing amber, press this button to turn the

HK 3475 on.

∫ Main Power Off: When the HK 3475 is turned

on, press this button to place it in the Standby mode.

In this mode, the unit is still connected to AC Power.

ç Source Selectors: Press these buttons to select an

input source for the HK 3475.

∂ Preset Up/Down: When the tuner is in use, these

buttons scroll through the stations that have been pro-

grammed into the HK 3475’s

memory.These buttons

also control the track Skip

Up and Down on compatible

Harman Kardon compact disc players and changers.

≠ Transport Controls: These buttons are used to

control Play, Play Forward, Play Reverse, Stop, Pause and

Record functions on compatible Harman Kardon compact

disc players/changers and cassette tape decks.Also,

when a compatible Harman Kardon compact disc

player or changer, or cassette deck, has been selected

using the Source Selectors ç, additional transport

control functions are available using the Preset Up/

Down ∂ and Tuning Up/Down ü buttons.

ƒ Disc Skip:These buttons do not have any func-

tions when controlling the HK 3475, but they operate

the Disc Skip functions of compatible Harman Kardon

compact disc changers.

in the Sleep mode. Each press of the button selects

the amount of time that will remain before the unit will

automatically go into the Standby mode, as shown in

the Main Information Display Û, in the following

order:

˙ Dimmer Button: Press this button once to reduce

the brightness of the Main Information Display Û

to half the normal intensity. Press it again to turn the

front-panel display completely off.When the display is

completely off, press the button to return to normal

brightness.

î Tuning: Press these buttons to tune up or down

through a selected frequency band.A brief (1⁄2 sec-

ond) press of the button will manually tune to the next

frequency increment, while pressing and holding the

button for a longer period will automatically tune to the

next station with a signal strong enough for acceptable

reception.

∆ Direct Button: Press this button to select a radio

station by entering its frequency using the Numeric

Keys K. (See page15 for more information.)

˚ Numeric Keys:These buttons serve as a ten-

button numeric keypad to enter tuner preset positions

or to tune stations directly.

¬ Auto Preset:When the tuner and FM band have

been selected, this button may be used to automatical-

ly program the tuner presets for all active stations.To

start the auto preset scan, press and hold the button.

The Memory Indicator E and Preset Indicator C

will flash.After a few seconds, the tuner will start to

“look” for active stations, as shown by increasing fre-

quency numbers in the Main Information Display.

Release the button and the tuner will briefly stop at

each active station and add a preset number to the

memory. If the FM tuner finds fewer than 30 FM sta-

tions with acceptable signal strength, the Auto Preset

tuning will scan two more cycles or until the remaining

vacant preset memory spaces have been filled with

those found in the first scan.The scan will stop when

all 30 preset memory spaces have been filled or when

three scans through the band have been completed.

µ Secondary Control Cover: This sliding cover

normally is in the “up”position so that it hides the

secondary controls (the Direct button, Numeric Keys,

Auto Preset button, Clear button and Memory button)

∆˚¬Ñø.To access these controls, place your

thumb on the small recessed area at the top center

of the control, and gently press the cover down and

toward you.

Ñ Clear Button:This button is used to clear preset

memory information for the HK 3475’s tuner. (See

page 15 for more information on tuner presets.)

ø Memory Button: Press this button to open a

memory position that stores a preset location for the

HK 3475’s tuner. (See page15 for more information

on tuner presets.)

π Master Volume: Press these buttons to raise or

lower the HK 3475’s volume.

œ Preset Scan Button: Press this button to auto-

matically scan through the list of stations that are pro-

grammed into the HK 3475’s tuner memory.When

the button is pressed, each preset station will play for

five seconds before the next station is selected. Press

the button again when the desired station is heard to

stop the preset scan.

® Mute Button: Press this button to momentarily

silence the HK 3475.

ß FM Mode Button: Press this button when the

tuner is in use in the FM band to switch to monaural

reception if the station is weak and noisy. (See page

15 for more information.)

† VMAx Selector: Press this button to engage

VMAx processing of a stereo input.The VMAx Mode

Indicator A will light, and you will notice a wider,

more spacious sound field. In order to obtain maxi-

mum benefit, you should be seated midway between

the two loudspeakers, and the same distance from the

speakers as the speakers are from each other.The

speakers must be placed facing parallel and evenly

with each other so that their baffles are in the same

plane. Press the button again to return to Stereo

mode.

ü Tuning Up/Down: When the tuner is in use, these

buttons will tune up or down through the selected fre-

quency band.A brief (1⁄2 second) press of the button

will manually tune to the next frequency increment, while

pressing and holding the button for a longer period will

automatically tune to the next station with a signal strong

enough for acceptable reception.These buttons will

also control Fast Forward and Fast Reverse (or

Rewind) for compatible Harman Kardon compact disc

players/changers and cassette tape decks.

√ Learn Button: This button is used when you

wish to program codes from another device’s remote

control into the HK 3475 remote.The procedure is

described on page 17.

∑ Speaker 1 Selector: Press this button

to turn

the speakers connected to the Speaker 1

Output

Terminals ‡ on or off.

≈ Speaker 2 Selector: Press this button

to turn

the speakers connected to the Speaker 2

Output

Terminals ° on or off.

¥ Transmitter Window: Point this area of the

remote toward the receiver when using the remote.

Ω LED Indicator: This indicator will light or blink to

confirm various steps in the learning process as the

HK 3475 remote is programmed. It will also flicker

when a key is pressed during normal operation to

indicate that it is transmitting an infrared code.

min

OFF