Assembly Sheet

STEP 1:

a. Insert 8 Dowels (#7) into top and bottom holes on each end of both Top Front Panel (H) and Top

Back Panel (I).

b. Attach 2 Top Side Panels (J) to Top Front Panel (H) and Top Back Panel (I) by using 4 Barrel Nuts

(#6) of each corner of top panels before inserting 4 Bolts (#3). Warning labels must be UPRIGHT and

facing INWARD. Tighten firmly with Wrench (#12).

Insert Barrel Nuts (#6) into Top Front

Panel, Top Back Panel and Top Side

Panels before inserting Bolts (#2)

from the underside of Top Panel (K).

Tighten firmly with Wrench (#12).

Changer Top Assembly Sheet

Assembly Sheet