Changing Table THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. If you have any questions or missing parts, please contact us. DO NOT return product parts to the store where it was purchased before contacting our Customer Service.
WARNING: READ ALL WARNING & SAFETY INSTRUCTIONS BEFORE ASSEMBLING AND USE OF THIS PRODUCT. KEEP INSTRUCTIONS FOR FUTURE USE. Storage: The product must be kept in a dry and clean area. Care and Cleaning: Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean with mild soap on a soft rag. Rinse and dry thoroughly. If you choose to refinish this furniture, be sure to use only a non-toxic finish specified for children’s products.
Changing Table Parts Identification Sheet DO NOT assemble changer if parts and hardware are defective or missing. Contact us for exchange or keep the original box for return authorization . ~ Changer Assembly Parts A1. Left Side Panel (1 pc) B1. Right Side Panel (1 pc) C. Drawer Front Panels (2 pcs) E. Drawer Right Panels (2 pcs) F. Drawer Back Panels (2pcs) G. Drawer Bottom Panels (2 pcs) I. Top Back Panel (1 pc) J. Top Side Panels (2 pcs) M.Upper Back Rail (1 pc) R. Upper Back Panel (1pc) K1.
~ Changer Assembly Hardware No Item # Fittings Qty 1 Allen key 3/16"*1" 1pc 2 Bolt 1/4"*2-1/2" 14pcs 3 Bolt 1/4"*2-1/4" 10pcs 4 Barrel 1/4"*13 mm 25pcs 5 Dowel 8*30mm 19pcs 6 Screw F4*25mm 20pcs 7 Machine Screw 3/16"*1" 6pcs 8 Bolt 5/32"*18mm 4pcs 9 10 Knob 4pcs Bolt 1/4"*1-3/4" 1pc Phillips screwdriver (Not included) 3
Changer Parts ___________________________________________________ Please follow this Parts Diagram to make sure that all parts are assembled in the correct position.
Changer Parts ___________________________________________________ Please follow this Parts Diagram to make sure that all parts are assembled in the correct position.
Changer Parts ___________________________________________________ Please follow this Parts Diagram to make sure that all parts are assembled in the correct position.
Changer Assembly Sheet ___________________________________________________ Step 1: Attach Drawer Left Side Panel (D) and Drawer Right Side Panel (E)to Drawer Back Panel (F) with 8 screws (#6) 6 D 6 F E 6 6 6 6 Step 2: 8 pcs Screw Slide Drawer Bottom Panel (G) into the grooves of the side panels.
Changer Assembly Sheet ___________________________________________________ Step 3: Attach Drawer Support (V) to Drawer Back Panel (F1) with 2 screw (#6) V G E 6 6 Step 4: 2 pcs Screw Attach Drawer Front Panel (C1) to assembled unit part (D) and part (E) and part (V) with 10 screws (#6).
Changer Assembly Sheet ___________________________________________________ Step 5: Attach Knob (#9) to Drawer Front (C1) with Bolt (#8). 8 D 8 Bolt 4 pcs 9 Knob 4 pcs F 8 G 9 8 C E 9 Step 6: 9 Insert 8 Dowels (#5) into top and bottom holes on each end of both Top Front Panel (H) and Top Back Panel (I). Attach 2 Top Side Panels (J) to Top Front Panel (H) and Top Back Panel (I) by using 4 Barrel Nuts (#4) of each corner of top panels before inserting 4 Bolts (#3).
Changer Assembly Sheet ___________________________________________________ Step 7: Attach Top Panel (K1) to assembled unit part (H) and part (I) and part (J) by using 4 Barrel Nuts (#4) of part ( H) and part (I) and part (J) before inserting 6 Bolt (#3).
Changer Assembly Sheet ___________________________________________________ Step 9: Insert 3 Dowels (#5) into top holes on each end of both Front Shelf Rail (N) and Drawer Front Rail (P). Attach Front Shelf Rail (N1) and Drawer Front Rail (P) and Back Shelf Rail (O) and Drawer Back Rail (Q) to Right Side Panel (B1) by using 5 Barrel Nuts (#4) of each holes of side panels before inserting 5 Bolts (#2). Tighten firmly with Allen key (#1).
Changer Assembly Sheet ___________________________________________________ Step 11: Insert 3 Dowels (#5) into top holes on each end of both Front Shelf Rail (N1) and Drawer Front Rail (P) . Attach Left Side Panel (A1) to unit by using 5 Barrel Nuts (#4) on the underside of right side of all rails before inserting 5 Bolts (#2). Tighten firmly with Allen Key (#1).
Changer Assembly Sheet ___________________________________________________ Step 12: Insert Dowel (#5) into Shelf Divider (U). Attach Shelf Divider to Upper Back Panel by using a Barrel Nut (#4) before inserting Bolt (#10). Tighten firmly with Allen key (#1).
Changer Assembly Sheet ___________________________________________________ Step 13: Insert 6 Dowels (#5) into Left Side Panel (A1) and Right Side Panel (B1) and Shelf Divider (U) before attaching changing table top to the unit. Secure changing table top by using Barrel Nuts (#4) before inserting Bolts (#2). Tighten firmly with Allen key (#1).
Changer Assembly Sheet ___________________________________________________ Step 14: Slide the drawers inside the assembled unit.
Changer Assembly Sheet ___________________________________________________ Changing Table Complete.
Wall Safety Strap • TOOLS NECESSARY: RUBBER MALLET, PHILLIPS SCREW DRIVER. WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE MAY TIP OVER. ! FOR YOUR CHILD’S SAFETY, PLEASE INSTALL THE SAFETY WALL STRAP BEHIND THE FURNITURE. PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT US. Safety Wall Strap 8” x 1.
Product Assistance Proceduresll We strive to ensure that our customers are receiving a quality piece of furniture. We want our customers to be satisfied with using our products for years to come. In the event that you need assistance or have any inquiries regarding our products, please feel free to contact us with the information below. To request replacement parts, please send an email to our customer service with the following information and we will do our best to assist you. 1.Proof of Purchase* 2.
One year limited warranty We want you to be satisfied with any product that bears our name or logo. We will provide promptly, at the request of the retailer, and without charge, any missing parts that have been reported, with proper description, within 7 days of the purchase of the products. Our warranty guarantees optimal workmanship and lack of significant defects. The product warranty lasts a year from the date of your purchase.