Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. A ADULT ASSEMBLY REQUIRED Dug to the presence of small parts during assembly keep out of reach of children until assembly is complete. ~ INSCRIBE +. "THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
NE on dais can suffocate ar soft theta Never adds pillow or comforter: Never pl place additional ‘padding: | + PO NOT Use this orb iffy caring cataclysm follow the sectioning ing 15 To disperse the risk of SIDS pediatricians recommend stealthy infants he fs opposed their backs to sen, Unless otherwise advised by our physician. parts of the body or Clothing on pose f toners. [ori a CAUTION: ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST WITHAL SICKNESS NOT EXCEEDING 6 IN. 4A WARNING: under an infant.
TODDLER BED A WARNING: INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. 0 Openings inland between bed parts can entrap head and neck of a small child NEVER tes bad with children youngish tin 18 mods. i ALWAYS Tallow assembly instructions:
te Convertir kit is dols paralyser ou have the option to concert bric to & full siée bed It 1:Use the bac rail as the hoverboard of full siée connecter the let foot plateforme and the light foot plateforme te the rail chichi are not inclure and dols paralyser. connecter the assembles parts and hoverboard o hardware } chichi are not inclure and dols sep Le Kit de conversion est fourni séparément Vous avez la possibilité de convertir la friche & aun lit de taille complote if 1.
(‘Section 3: Full Size Bed Conversion | : h STEP 2 Parts and fools required fo complete step. Side Bar (PCS) From Section 3 Step 1 Spit leg (2PCS}) Wrench Supplied Converting kit is sold separately You have the option to convert crib to a full size bed [I 1.Insert the split leg to the left&right side bar . : : 2.Connect the headboard Leg to the left side bar and the right side bar. 3.Connect the foot board Leg to the left&right side bar. 4.Connect the ¢ to the left&right side bar. cross bar to the side bar.
(Section 3: Full Size Bed Conversion | STEP 1 Parts and tools required to complete step. Alien ’ Wrench Supplied I You have the option to convert the crib to a Full Size Bed. Simply follow steps in reverse order to disassemble the crib. Then remove fhe Rear Legs from the left Crib End and Right Crib END with the M4 Allen Wrench as shown. : “Store all parts and hardware in a safe place.. AD PARTS: HARDWARE AND TOOLS Bolt x4 ‘d 344” Bolt x4 {Painted blue) g.
SECTION 1: CRIB ASSEMBLY ;/ Parts and tools required to complete step. GO. Interior Bolt X10 Paneling x2 Rail Stabilizer Bar 2 x1 b. Bolt x2 L. Front Dowel x2 v Wrench Supplied M. Stabilizer Battlefront K. Right Front Co > J Bar 1 xt Leg x1 Leg x1 .
(Section 2: Toddler Bed Conversion STEP 2 Parts and tools required to complete step. A Bar Bolt x2 a N. Stabilizer h. Dowel x2 ¢. Barrel news x2 M4 Allen . Wrench Supplied bar be very careful not to scratch the finish. SA SEN TIN ST Sy AE BVA ANN free ; TREES Do Attach (1) Stabilizer Rar (Part N} to the assembly from step 1 using (2) Bolts (Part a) , (2) Barrel nuts (Part g) and (2) Dowel (Part h). Tighten with the M4 Alien Wrench. Gently pull the left and right front leg apart.
(‘SECTION 1: CRIB ASSEMBLY ! AY {Section 2: Toddler Bed Conversion STEP 3 } STEP 1 ( Parts and tools required to complete step. ! Parts and tools required to complete step. Alien D. Left Crib End Top x1 Tranche Supplied TN M4 ALLEN WRENCH SUPPLIED SS Co 1-34” Bolt x4 { E. Right Crib End Top x1 F. Crib End x2 — Attach (1) Left Crib End Top (Part D} te (1) Crib End (Part F) using (2) Bolts (Part c}. Tighten Remove the Front Rail installed in step 1 of section 1 Crib Assembly. with the M4 Allen Wrench.
(SECTION 1: CRIB ASSEMBLY "(SECTION 1: CRIB ASSEMBLY i re aes E ) STEP STEP 4 / Parts and tools required to complete step. Parts and tools required to complete step. Assembly Instruction“ Coe J ; Booklet ; Alt Barrel nuts From Step 2 From Step 3: Md Allen isd Wrench Supplied ] . Store.the assembly instruction booklet in the pouch attached to the mattress support. Store: : install The Assembly From 3 To The Assembly From 2 using (4) Bolts (Part b) and (4) Barrel. .
(‘SECTION 1: CRIB ASSEMBLY STEP § Parts and tools required to complete step. | From Step 1 From Step 4 b. Bolt x8 M4 Allen Wrench Supplied : Install The Assembly From 4 To The Assembly. From 1 Tighten with the M4 Allen Wrench. using (8) Bolts {Part b} . ~ (‘SECTION 1: CRIB ASSEMBLY STEP 6 Parts and tools required to complete step. d. 3/4" Bolt x4 (Painted bus) ay M4 Allen 7 Wrench Supplied P. Mattress Support’ x1 Attach (1) Mattress Support (Part P} To The Assembly From 5 Using (4) 3/4" Bolts (Part D).