Manual

HS-3100/3200 Operator’s Manual

Notes:

1. These zones do not restore.

2. Privilege Level 0 generates a restore signal; all others generate a trouble signal.

3. This zone does not restore and is not repeated sequentially in the archive.

SSS Sub-Zone Number

Addressable Circuit: Device Number

Comlink 1 (Zone 51): Unit Netowork ID number

Comlink 3 (Zone 53): Unit ID number

Note: Only HS-2802 Annunciators use IDs other than 000.

Comlink 6 (Zone 54): 000 to 008 - HS-2802

009 to 016 - HS-3140/3434

239 - HS-2801

240 - HS3DL

Output Supervision (Zone 60): Output Circuit Number

Program Re-start (Zone 69): 000 - Power On/Hard reboot

001 - Watchdog

002 - Clock Monitor

003 - Illegal Instruction

004 - Unused Interrupt

005 - Orphan Interrupt

Privilege Level (Zone 80): Level Set

Switch (Zone 83): Switch Number

Hot Key Activation (Zone 90): Function Number of the Hot key pressed

Network Reboot (Zone 92): Unit ID of panel broadcasting the command

Network Reboot Required who (Zone 94): Unit ID of panel generating the Network Reboot

Required trouble

Network Reboot Required why (Zone 95): Reason the panel generated the Network

Reboot Required

001 -- network

002 -- network

003 -- port 3

006 -- negative counter

008 -- memory overflow

All Others: Always 000