Power Supply User Manual

Chapter 1: Introducing the 6800/7000 Series of Frames Frame Description
2 6800/7000 Series - Frames and Power Supplies Installation and Operation Manual
Frame Description
The 680x series of frames offers a modular flexible solution to a wide
range of serial video processing and distribution functions. The
following table shows a complete list and description of the 6800/7000
frames:
Frame Description
FR-6801/FR-6801-1 A single rack unit housing four modules, and
including the 6804PS(-1) power supply unit.
FR-6804/FR-6804-1 A two-rack unit, providing up to eight outputs per
module, with a maximum of ten modules. The
FR-6804(-1) comes equipped with one power
supply unit, the 6804PS(-1), and is pre-wired for
an optional second 6804PS(-1) unit or
6804PS-1-48. If power consumption is greater
than 40 W, the CF-6801 Cooling Frame is
required.
CF-6801 Cooling Frame A one-rack unit (1RU) installed above the
FR-6804(-1) frame.
FR-7001 A single-rack unit housing up to four processing
modules and their appropriate interface modules
(back-boxes), and one 6801PS power supply.
FR-7000MB MIX BOX A mounting frame designed for stand alone
operation. Each unit houses a single module and a
7000PS Power Supply. Any module requiring
more than 7.5 W of total power can NOT be
installed in a FR-7000MB MIX BOX frame.
FR-6801-1-48 A 1RU vented frame housing four modules, and
one 6801PS-48 power supply unit.
FR-6804-1-48 A 2RU vented, two-rack unit, providing up to
eight outputs per module, with a maximum of ten
modules. The FR-6804-1-48 comes equipped with
one power supply unit or the 6804PS-1-48, and is
pre-wired for an optional second 6804PS(-1) or
the 6804PS-1-48. If power consumption is greater
than 40 W, the CF-6801 Cooling Frame is
required.