Power Supply User Manual

6800/7000 Series - Frames and Power Supplies Installation and Operation Manual 25
Chapter 5
FR-7001 and FR-7000MB MIX BOX
Overview
The FR-7001 frame is a single rack unit (1RU). It includes one 6801PS
Power Supply and can house up to four processing modules and their
appropriate interface modules (back-boxes). The FR-7000MB MIX BOX
frame is designed for standalone operation. Each unit houses a single
module and a 7000PS Power Supply. The FR-7000MB has a detachable
power supply cord and each MIX BOX
requires its own power supply
cord.
Four rubber feet are included if the unit is not rack mounted. If rack
mounting is desired, the MMT-03 MIX BOX Rack Mounting Tray
(1RU) will accept up to three MIX box units. The MBP-01 Blank Front
Panel may be ordered to fill the blank slots if less than three units are
used.
The front of the FR-7000MB MIX BOX has a fold-down front panel for
quick and easy access to the power supply and module inside. Each
module also has an individual back module that attaches to the MIX
BOX back panel.
Any module requiring more than 7.5 W of total power can NOT be
installed in a FR-7000MB MIX BOX frame. The EDH-6800 and the
VTG-6801-1(A) modules are also available in module-specific MIX
BOXES with dedicated control panels. If you require either of these MIX
BOXES they should be ordered using the following part numbers:
• EDH-6800-2MB
• VTG-6801-1MB
• VTG-6801-1A-MB
See the 6800/7000 Te s t S e r i es
Instllation and Operation
Manual
for more information
on other MIX BOX products.