Use and Care Manual
19
SETUP OVERVIEW
1. Place the freeze dryer on a at,
clean, dry surface. Adjust the feet, if
necessary, so that all four are rmly
on the table, cabinet, cart or oor.
The front two feet should be adjusted
½” to ¼” taller than the two rear feet.
2. Make sure a plug outlet is
available within three-ve feet of
the freeze dryer base.
3. Ensure that freeze dryer side vents
are unobstructed to allow proper air
ow during use.
4. Connect vacuum pump plug into
the freeze dryer receptacle.
5. Connect vacuum pump hose to
both the vacuum pump and to the
freeze dryer.
6. Follow Section 6 of this manual to
ensure that you have a closed system.