User's Manual

108
Chapter VI: Appendix
6-1 Hardware Specification
SOC+RF: Ralink RT3662 + RT3092L
Gigabit Switch: Realtek RTL8367R
Flash: 8MB Parallel Flash
RAM: 64MB DDR2 RAM
LAN Ports: 10/100/1000M (Auto-MDI/MDI-X) UTP Port x 1
MIMO Technology: 5GHz: 2T2R MIMO, 2.4GHz: 2T2R MIMO
Antenna: 5dBi Dual Band Fixed Dipole Antenna x 2 (2T2Rfor 5GHz and 2T2R for 2.4GHz)
Output Power:
2.4GHz
11b(11Mbps): 18±1.5dBm
11g(54Mbps): 17±1.5dBm
11n: 17±1.5dBm
5GHz
11a(54Mbps): 14±1.5dBm
11n(20MHz, MCS23): 14±1.5dBm
11n(40MHz, MCS23): 14±1.5dBm
Power: 48VDC, 0.5A Switching Power Adapter (for PoE)
Temperature Operating: -20~70C, Storage: -40~80C
Humidity Operating: Operating: 10~90% (Non Condensing), Storage: Max.95% (Non
Condensing)
6-2 Troubleshooting
If you find that the access point is working improperly or stops responding, check some
of the FAQs below. You can also contact our support by email or phone.
Scenario
Solution
Access point is not
responding to me when I
want to access it by web
browser
a. Please check the connection of power cords and
network cables of this access point. All cords and
cables should be correctly and firmly inserted into
the access point.