User's Manual

41
802.11 Draft-N, or 802.11g) will be able to connect to this
access point.
If you select 2.4GHz (B+G), then only wireless clients using
802.11b and 802.11g band will be able to connect to this access
point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N
clients to connect to this access point, select 2.4GHz (B+G+N).
5GHz Band
5GHz (A): this mode allows 802.11a wireless network client to
connect this router (maximum transfer rate 54Mbps for 802.11a
clients).
5GHz (N): this mode allows 802.11n wireless network client to
connect this router (maximum transfer rate 300Mbps for
802.11n clients).
5GHz (A+N): this mode allows 802.11a and 802.11n wireless
network client to connect this router (maximum transfer rate
54Mbps for 802.11a clients, and maximum 300Mbps for 802.11n
clients).
Channel Number (3): Please select a channel number you wish to use. Please note
that this should be the same channel as the other bridge you
wish to connect to.
Mac Address (4): Please input the MAC address of the other bridge you wish to
make a connection with
Set Security (5): Click this button to select an encryption mode for this wireless
link, a new popup window will appear. Note: the security must
be the same on the other bridge.
Adv. IP Address (6) This section allows you to set an IP Address and subnet mask to