User's Manual

49
2-4-6 Setup Procedure for ‘Universal Repeater’
On the drop down box, please select “Universal Repeater”. It may take a few second to
load because once this mode is select, it will scan for available networks to extend.
Step 1) This will prompt you to create a custom name. By default, the range extender
will be the same SSID as your original wireless network. If you wish to change it,
please uncheck and manually input a custom name. Otherwise, leave checked.
Step 2) Please select your wireless network from the list below by selecting the network
with your mouse. If your wireless network does not appear, please click ‘Scan’ so our
HOD45B can rescan the wireless networks. Blue networks are 2.4GHz and orange
networks are 5GHz. You can also manually input your SSID and channel if you know
them.
Step 3) After you select your network, press ‘Connect’ to proceed to the next step. If
you wish to change your IP address, refer to the Advanced IP settings before you select
“Next.”