User's Manual

3-1 Time zone and time auto-synchronization

Please follow the following instructions to set time zone and time auto-synchronization

parameters:

Please click ‘General Setup’ at the top of web management interface, select ‘System’ on

the left hand column, and select ‘Time Zone’.

The time zone settings will be displayed in your web browser: Please select the correct

time zone from the drop-down list, and input the IP address or host name of the time

server. If you want to enable daylight savings setting, please check ‘Enable Function’ box,

and set the duration of daylight setting.

After you finish with all settings, please click ‘Apply’ button and the following message

will be displayed on your web browser: