User's Manual

Please click ‘General Setup’ at the top of web management interface and click ‘Local

Network’ on the left hand column.

There are two setup groups here: ‘LAN IP’ and ‘DHCP Server’

3-3-1 Local Network

IP address (1): Please input the IP address of this access point.

Subnet Mask (2): Please input subnet mask for this network.

Gateway Address (3): Please input your gateway address for the network.

802.1d Spanning Tree (4): Spanning-Tree Protocol (STP) prevents loops from being

formed when switches or bridges are interconnected via multiple

paths

DHCP Server (5): If you want to activate DHCP server function of this access

point, select ‘Enabled’, or set it to ‘Disabled’.

Recommended Value if you don’t know what to fill:

IP Address: 192.168.1.230 802.d Spanning Tree: Disabled

Subnet Mask: 255.255.255.0 DHCP Server: Disabled

Gateway Address: (leave it blank)