User's Manual

3-4-1-3 AP Bridge-Point to Point

Similar to station-infrastructure, this requires two HOD45B’s on each end. This will

create a wireless bridge between these two points. No WiFi signal will be broadcast and

it will only make a wireless connection between those two points.

Band (2): Select the band you want to use, the two HOD45B’s must use the

same setting. Refer to 3-4-1-1 for definitions.

Channel Number (3): Select the channel you want to use, the two wireless

HOD45Bs must use the same setting.

MAC Address (4): Input the MAC address of another HOD45B

Security Settings (5): Click to setting security for this connection

(Please go to section ‘3-4-3 Wireless Security’

for detailed instructions).

NOTE: Two HOD45B’s must use the same mode, band, channel

number, and security setting!