1 Port Wireless G USB Print Server User's Manual

6.5 Configure Remote lpd Printing on the Host
You can use this procedure to configure your Unix host(s) to
allow printing to your network. The procedure below can be
used for Unix variants that are related to BSD Unix, like
SunOS or Linux. For other versions of Unix, consult your
system documentation, keeping in mind that:
1. The print server should be treated as a BSD networked print
server host.
2. The host name should be the name (or IP address) that you
have assigned to the print server.
3. The printer name (or queue name) on the remote host should
be lpt1, lpt2 or lpt3, the name of the parallel port on the print
server.
You will need to perform the tasks below, logged in as the
superuser (root). To configure your Unix host for printing,
1. Optionally, assign a name corresponding to the print
server’s IP address. You can add this address to the /etc/hosts
file, by adding the following line:
203.66.191.186 pserver
2. Create a spool directory for the printer in the same
directory where spool directories are normally kept on the
machine, such as /var/spool or /var/spool/lpd:
mkdir /var/spool/lpd/pserverd
chown daemon /var/spool/lpd/pserverd