Installation Manual

2
6
Removal of Obstructions
Turbine Vanes/Blades
Tires
Servicing the Cleaner
2
3
larger oval
round
The turbine vanes have to be placed in the turbine hub a
certain direction. We use the following mnemonic the turbine
vanes are like “a wave breaking” toward the front of the clean-
er. In the front of the unit the vanes are convex ( like a moun-
tain ) in the back they are concave ( like a valley ). NOTE: The
large elliptical end of the vanes is placed into the turbine.
Wear Marks:
The tires must be replaced when they are worn down to the
tread wear indicators. Note: if you cant see them you are
worn past them.
Removal and Replacement:
wear marks
1
2
USING CLEANER WITH
WORN TIRES MAY DAMAGE
POOL SURFACE OR TRIM!
1
260630_Hayward_English.indd 7 12/16/14 8:51 PM