Installation Guide

ManualsBrandsHayward ManualsOutdoors1 HP PowerFlo Matrix with Micro Timer and Cord

ISSP1591

Rev. D

_________________________________________________________________________________

OWNER’S MANUAL

INSTALLATION, OPERATION, & PARTS

Power-Flo Matrix

™

Pump Series

The Hayward Power-Flo

Matrix™ Pump Series is specifically engineered for the demanding requirements of today’s above-

ground swimming pools. The advanced design reduces maintenance requirements while providing superior performance.

To prevent potential injury and to avoid unnecessary service calls, read this manual carefully and completely.

CAUTION – We highly recommend a qualified professional install and service this product.

WARNING – This manual contains important safety information that must be furnished to the end

user of this product. FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS COULD RESULT

IN SERIOUS INJURY.

*Only units equipped with 3'

twist-lock cords are UL-listed.

SAVE THIS INSTRUCTION MANUAL

HAYWARD POOL PRODUCTS, INC.

Corporate Headquarters: U.S.A:

620 Division Street 1 Hayward Industrial Drive 2935 Sidco Drive 2875 Pomona Blvd.

Elizabeth, NJ 07207 Clemmons, NC 27012 Nashville, TN 37204 Pomona, CA 91768

Canada: Europe:

2880 Plymouth Drive P.I. Plaine de l'ain

Oakville, Ontario L6H 5R4 Allêe des chênes

01150 St Vulbas France

Summary of content (13 pages)

PAGE 1
ISSP1591 Rev. D _________________________________________________________________________________ OWNER’S MANUAL INSTALLATION, OPERATION, & PARTS Power-Flo Matrix™ Pump Series The Hayward Power-Flo® Matrix™ Pump Series is specifically engineered for the demanding requirements of today’s aboveground swimming pools. The advanced design reduces maintenance requirements while providing superior performance.
PAGE 2
Power-Flo Matrix™ Pump Series ____________________ PRODUCT REGISTRATION (Retain For Your Records) DATE OF INSTALLATION ____________________ INITIAL PRESSURE GAUGE READING (CLEAN FILTER) _______________________ PUMP MODEL ________________ HORSEPOWER _______________________ FILTER MODEL ________________ SERIAL NUMBER _______________________ IMPORTANT SAFETY INSTRUCTIONS When installing and using this electrical equipment, basic safety precautions should always be followed, including the following: Fa
PAGE 3
Power-Flo Matrix™ Pump Series __________ ________________________ NOTE: The National Electrical Code (NEC) permits use of a cord with a maximum 3 ft. (1 m) length. If your pump is equipped with a cord complying with the NEC, the following three (3) items apply. WARNING – Risk of Electric Shock. Connect only to a grounding type receptacle protected by a Ground Fault Circuit Interrupter (GFCI). Contact a qualified electrician if you cannot verify that the receptacle is protected by a GFCI.
PAGE 4
Power-Flo Matrix™ Pump Series ____________________ Product Specifications Dimensions General Information Introduction This manual contains information for the proper installation and operation of the Hayward Power-Flo Matrix™ pump. The instructions in this manual MUST be followed precisely. Product Features The Above-ground industry’s largest above-ground strainer basket for large debris collection with minimal maintenance.
PAGE 5
Power-Flo Matrix™ Pump Series ____________________ Installation Instructions (cont.) Pump Location (cont.) Install pump on a firm, level base or pad to meet all local and national codes. The field supplied base or pad must be level and vibration-free. Though the pump is designed for outdoor use, it is strongly advised to protect the electrical components from the weather. Select a well-drained area, one that will not flood when it rains. Pump motors require free circulation of air for cooling.
PAGE 6
Power-Flo Matrix™ Pump Series ____________________ Installation Instructions (cont.) Electrical (cont.) Voltage Voltage at motor MUST NOT be more than 10% above or below motor name plate rated voltage, or motor may overheat, causing overload tripping and reduced component life. If voltage is less than 90% or more than 110% of rated voltage when motor is running at full load, consult power company.
PAGE 7
Power-Flo Matrix™ Pump Series ____________________ New Installation – Start-Up & Operation (cont.) Prior to Start-Up (cont.) WARNING – If pump is being pressure tested, be sure pressure has been released before removing strainer cover. WARNING – Do NOT block pump suction. To do so with body may cause fatal injury. Small children using pool MUST always have close adult supervision.
PAGE 8
Power-Flo Matrix™ Pump Series ____________________ Storage/Winterization (cont.) Drain all water from pump and piping when expecting freezing temperatures or when storing pump for a long time (see instructions below). Gravity drain system as far as possible. Keep motor dry and covered during storage. To avoid condensation/corrosion problems, do NOT cover or wrap pump with plastic film or bags.
PAGE 9
Power-Flo Matrix™ Pump Series ____________________ Shaft Seal Change Instructions (cont.) 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Hold the motor shaft securely by either inserting a screwdriver in slot at end of shaft or by using an open-end wrench to engage the flat surfaces provided near end of motor shaft. Rotate the impeller ina a counterclockwise direction and remove it from the motor shaft.
PAGE 10
Power-Flo Matrix™ Pump Series ____________________ Troubleshooting (cont.) Pump Won’t Prime 1. 2. 3. Make sure pump/strainer housing is filled with water and the cover O-ring is clean, also be sure it is properly seated in the cover O-ring groove. Make sure strainer cover is locked firmly in position and lubricated with “Jack’s 327.
PAGE 11
Power-Flo Matrix™ Pump Series ___________________ Replacement Parts Parts Diagram Parts Listing Ref. No. Part No. Description Ctn. Qty.
PAGE 12
Power-Flo Matrix™ Pump Series __________ HAYWARD® LIMITED WARRANTY This pump was inspected before shipment from our plant. To original purchasers of this pump, Hayward Pool Products, Inc., 620 Division Street, Elizabeth, New Jersey, warrants its products free from defects in materials and workmanship for a period of ONE (1) year from the date of purchase.
PAGE 13