Instruction Manual Automatic Upper ArmBlood Pressure Monitor Model No.
Table of Contents Medical Disclaimer……………………………………………………………………………03 Intended Use………………………………………………………………………………..…03 About Blood Pressure………………………………………………………………………04 Measurement Method…………....……………………………………………………06 Accuracy……………………….…………………………………………………………………06 Precautions………………….…………………………………………………….…………….. 07 Device Overview……………………………………………………………………………….09 Symbol Definitions………………………………………………………………………….12 Features………………………………………………………………………………………….13 InstallingBatteries………………………………………………………………………….
Medical Disclaimer This manual and product are not meant as a substitute for advice provided by your doctor. You are not to use the information contained herein, or this product for diagnosing or treating a health problem or prescribing any medication. If you have or suspect that you have a medical problem, promptly consult your healthcare provider. Intended Use This device uses the oscillometric method to automatically measure systolic and diastolic blood pressure as well as heart rate.
About Blood Pressure 1. What is blood pressure? Blood pressure is the measurement of the force of blood pushing against the walls of the arteries. Arterial blood pressure is constantly fluctuating during the course of the cardiac cycle. The highest pressure in the cycle is called the systolic blood pressure, and represents the pressure in the artery when the heart is beating. The lowest pressure is the diastolic blood pressure, and represents the pressure in the artery when the heart is at rest.
Abou A ut Blood Pres ssurre A. Standards fo or assess sment of high or low blood pres ssure without rega ard to age, have been b established d by the WHO, W and classifica c ationsad dapted fr rom JNC7: WHO O: W World Health Orga anization JNC 7: The Seventh Re eport of the Joint J National Com mmittee on Preventiion, Detection, Evaluation, and Treatm ment of h Blood Pressure e. NIH High Publication No o.
Measurement Method HL858CB Automatic Upper Arm Blood Pressure Monitor measures blood pressure and heart rate by oscillometric method, meaning the fluctuations in pressureare measured. Once the cuff is wrapped around your upper arm, just turn on the monitor and inflation automatically starts.The inflation of the cuff creates pressure around the arteriesinside upper arm. Within the cuff is a gauge which senses thefluctuations (oscillations) in pressure.
Precautions * Do not use this manual and product as a substitute for advice, diagnosing or treating a health problem or prescribing any medication by your doctor. If you have a medical problem, promptly consult your healthcare provider. * Read the Instruction Manual thoroughly before measuring and keep it at hand for your reference at any time. * This device uses the oscillometric method to measure systolic and diastolic blood pressure as well as your heart rate.
Precautions For those who have had mastectomy surgery (especially whose’ lymph nodes removed), it’s recommend take a measurement on the unaffected side. When used among medical electronic equipments on the same limb, pressurization of the cuff may cause temporarily malfunction toother devices.
Device Overview Part names and product components LCD Display Battery Cover (located on bottom of Unit) MEMORY BUTTON RIGHT BUTTON LEFT BUTTON USER-SELECT BUTTON START / STOP BUTTON AA(LR6) (1.
Device Overview DATE/ TIME SET BUTTON AM/PM AVERAGE BUTTON REST ASSURE TRIPLE-CHECK FUNCTION SWITCH MODE SWITCH DC JACK 6V 1A AC Adapter *Caution! Substitution of a component different from that supplied might result in measurement error.
Device Overview Unit display Low Battery Symbol Irregular Heartbeat Detector Error Symbol Risk Category Indicator Rest Assure Mode Symbol Bluetooth Symbol Systolic Rate Triple-Check Function Indicator AM/PM Average Symbol User Symbol Diastolic Rate Combine Date and Time display Also represents Year value Pulse Symbol Heart Rate 11
S bol Defin Symb D nition ns SYMBOL LS Definittions his symbol appears wh hen the battterypower is excessiv vely lowor Th th he polarity reverses. LowBattery Symbol S Î We sugge est you replace all battterieswith n new ones, and a make su ure the +/-polarities are a properly y positioned d. Errror Symb bol:Error display. O Once pulse is s detected, the symbo ol flashes with each pullse beat. Pulse Sym mbol Co ompares re eadings aga ainst blood pressure g guidelines.
Features Risk Category Indicator This device is equipped with Risk Category Indicator which classifies your blood pressure measurements into four stages (Normal, Pre-hypertension, Stage 1 Hypertension to Stage 2 Hypertension) based on the blood pressure standards established by the U.S. Department of Health and Human Services and the National Institutes of Health.The indicator symbols are defined as following classifications: You may use the function to effectively track your blood pressure.
Features For adults 18 and older who are not on medicine for high bloodpressure, are not having a short-term serious illness, and do nothave other conditions, such as diabetes and kidney disease.To determine category of risk when systolic and diastolicreadings fall into two areas, use the higher of the two numbers forclassification. There is an exception to the above definition of highblood pressure for people with diabetes and chronic kidney disease.
Features Rest Assure Function Before measurement, it is suggested that you sit quietly for 5 minutesbefore measurement as measurements taken in a relaxed stateaccording to JNC7 report to have a greater accuracy. HL858CBprovides users a helpful countdown function(REST ASSUREon/off switch) for 5 minutesbefore the measurementthat helps users to get accurate results.To turn this feature OFF, slide the switch on the back to the OFF position.
Features Irregular Heartbeat Detector The symbol will appear on screen indicating a certain heartbeat irregularity was detected during measurement. The heartbeat rhythm that is more than or less than 25% from the average rhythm is usually defined as an irregular heartbeat rhythm. Talking, moving, shaking or an irregular pulse during the measurement can result in the appearance of this symbol.
Features Bluetooth Data Transmission HL858CB features a built-in “Bluetooth Data Transmission” function, which enables the device automatically transmit measuring results to paired Bluetooth device. Bluetooth compatibility with blood pressure monitor for Bluetooth-enabled device is: Bluetooth 4.0 for Android 4.3 or above, Bluetooth 4.0 foriOS 5.
Insta alling g Battterie es When LOW W W BATTER RY SYMB BOL appears s on the display, or no re eaction to owardoperation, pllease change batte eries. Replace all worn-ou R ut batterie es with ne ew ones and a do no ot mix new w and used battteries. Do D not mix m alka aline,standard (ca arbon-zinc) or echargeab ble (cadm mium) battteries eitther.Such action m may shorte en the re ba attery life e or cause e the dev vice to ma alfunction n.
Using the AC Adapter This monitor is designed for operation with batteries or an AC adapter. Please use only a compatible AC adapter with required voltage and current as indicated in this manual. Note: No batteries are needed when operating with an AC adapter. Please unload the batteries when operating with an AC adapter for an extended period of time. Leaving the batteries in the compartment for a long time may cause leakage, which may lead to damage of the unit.
Applying the Cuff Press your brachial artery approximately 1 inch (2 ~ 3 cm) above the elbow on the inside of your left arm to determine where your strongest pulse is. Slide the end of arm cuff furthest from the tube through the metal ring to a loop. The smooth cloth should be on the inside of the cuff. If the cuff is located correctly, the velcro will be on the outside of the cuff and metal ring will not touch your skin. Put left arm through the cuff loop.
M surem Meas ment Pro oced dure Swittch on the Monitor A. Put in 4 AA (LR R6) alkalin ne batteries B. All seg gments appear on the scree en for 3 seconds. s C. The m monitor will automa atically turn to pow wer saving g mode (a all LCD segme ent cleare ed) Setting Year, Tim me and dDate A To ad A. djust the date an nd time, press the e Date/ Time Set Butto on. B. Press s buttton ("YEA AR" flashe es). Press sor bu utton to adjust a YEAR Rvalue (20 015 is deffined initially).
M surem Meas ment Pro oced dure B. Selec ct User (s see LCD Displays D below). b C. Press s butto on to conffirm the chosen c us ser. D-1. Sta art a Sing gle Meas suremen nt: 1. Mak ke sure th he Triple-Checkfun nctionswittch turned d off. 2. If REST R ASSU URE MOD DE is on, with w the cu uff wrappe ed around d your upp per arm,press button to starrt a 5 min nutes coun ntdown (““REST” flas sh). 3. Tim me end, allunits app pear on th he screen n for3 seco onds, and d start st the 1 meas surement. 4.
M surem Meas ment Pro oced dure E-1.Start a Multi-M Measure ement:wiill take continua c tive 3 tim mes m measurem ments. 1. Mak ke sure th he Triple-Check functionswiitch turne ed on. 2. If REST R ASSU URE MOD DE is on, with w the cu uff wrappe ed around d your upp per arm, press p buttton tostarrt a 5 min nutes coun ntdown (““REST” flas sh). 3. Tim me end, allunits app pear on the screen n for3 sec conds,and d start the 1st me easureme ent. (“M MEASUREM MENT 1”” flash while mea asuring). 4.
M surem Meas ment Pro oced dure E-2.Start a Multi-M Measure ement:wiill take continua c tive 3 tim mes m measurem ments. 1. Mak ke sure th he Triple-Checkfun nctionswittch turned d on. 2. If REST R ASSU URE MOD DE is off, with w the cu uff wrappe ed around d your upp per arm, press button tosta art the measurem m ment.All display unitts appearr on the sc creen for 3 seconds, and willl automatically s st starrt the 1 measurrement (“MEASUR ( REMENT 1” flash while mea asuring). 3.
B tooth Bluet h Tra ansm mission To o activate e Bluetootth functio on, please e make su ure your A Android device d have down nloaded APP. A There are 2 ways to o process s Bluetootth functio on: Single Measure ement Multi Measurrement M Measurem ment Com mpleted:: Bluettooth Sym mbol Flash Bluetootth Symbol Flash 1. After meas surementt complete ed, th he device activates s Bluetooth fu unction au utomatica ally, (B Bluetooth h Symbol flashing) 2.
M ory Func Mem ction n Storring da ata After eac ch measu urement, the systo olic and diastolic d p pressure, heart rate, Risk k Categorry Indicato or and Irrregular he eartbeat d detector (if ( any) with date e and time will be automatically storred. The mon nitor can store up p to 120memory sets for per userr, and automatically repllace the oldest o datta with ne ew one. Mem mory Fu unction Press MEM Mand AM/PM Avera age keyto o activate Memory--Select Mode. 1.
M ory Func Mem ction n Reca alling Data D in n Average Memory y Mode e A. Sele ect User first. f B. Press MEM key k to entter Memo ory Mode, andLCD disp playsan average off the last 3 memories. (If a Triple-C Check result includ ded, the average a of it willbe included, but itts individu ual measu urements s will be not. See S the example e as a below.)) Avera age of Lastt 3 Meas surements t <
M ory Func Mem ction n Reca alling Data D in n Average Memory y Mode e A. Sellect User first. B. Pre ess AM/PM Mbutton to t enter Memory M M Mode. LCD D displays average e of latestt 3 AM measureme ents. C. Pre ess AM/PM Mbutton again, a LCD displays ave erage of latest P measu urements. 3 PM Averrage of Las st 3 AM Measureme ent Averrage of Lastt 3 PM Measureme M ent D. When done, press ME EM button again an nd return tto Standb by Mode. Eras sing da ata A. Sellect User first. B.
S age and Stora a Main ntena ance e Gene eral Us se Do not in any wa ay twist the t cuff. Do not press button iff the cuff is not wra appedaro ound yourrupper arm. Do not drop the product a and avoid d any stro ong impac cts. Main ntenan nce Use a piece p of cloth with water or mild cleansing age ent to wip pe the device and a dry itt immedia ately with h a dry clo oth. Do not use deterrgent or any a strong chemic cals to cle ean the de evice. Use only a dry cloth to wipe the cu uff.
T Trou bleshootting SYMB BOLS/SYM MPTOMS Unit does d not turrn on when pushe ed. IND DICATION N/ CORRECTION N Rep place them m with 4 new w AA (LR6)) alkaline battteries. CON NDITIONS/CAUSES W Worn-out b batteries. butto on is Battery pola B arities have e been p positioned incorrectly. Re--insert the battteries in th he corrrectpositions. C Cuff has been placed incorrectly. Wrrap the cufff operlyso tha at it is pro pos sitioned corrrectly.
Warranty & Recalibration Warranty For One Year from the manufacturing date Please note that this warranty does not cover damage caused by misuse or abuse; accident; the attachment of any unauthorized accessory; alteration to the product; improper installation; unauthorized repairs or modifications; improper use of electrical/power supply; loss of power; dropped product; malfunction or damage of an operating part from failure to provide manufacturer’s recommended maintenance; transportation damage; theft
Specifications Model Number HL858CB Measurement Method Oscillometric RatedRange of Cuff Pressure 0~300 mmHg RatedRange of Determination MeasurementRange of Heart Rate Accuracy Inflation Deflation Display Memory Unit Dimensions Unit Weight Cuff Size Storage/ Transportation Environment Operation Environment Power Supply BatteryLife Power-saving Mode Accessories 40~280 mmHg 40~199 beats/minute Pressure: ±3 mmHg Pulse: ±5% Max.
Specifications RF Type Bluetooth 4.0 BLE RF Modulation GFSK Effective Radiated Power 0dBm Data Throughput 0.2Mbps Expected Delay (Latency Range) in Wireless (RF) Communication The latency time is less than 0.3ms from sender to receiver. Integrity Channel Quality-Driven Data Rate (CQDDR) technology increases the effective data rate and integrity in noisy environments.
Note Follow instructions for use. BF Classification: - The applied part is cuff - Internally powered equipment - BF type applied part - IP22 - Not suitable for use in presence of flammable anesthetic mixture with air or with Oxygen or nitrous oxide - Continuous operation with short-time loading To avoid inaccurate results caused by electromagnetic interference between electrical and electronic equipments, do not use the device near a mobile phone or microwave oven.
Note *Note! This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if notinstalled and usedin accordance with the instructions, may cause harmful interferenceto radio communications.
Appendix Guidance and manufacturer’s declaration – electromagnetic emissions The device is intended for use in the electromagnetic environments listed below, and should only be used in such environments: Emissions test RF emissions CISPR 11 Compliance Group 1 RF emissions CISPR 11 Harmonic emissions IEC 61000-3-2 Voltage fluctuations/ flicker emissions IEC 61000-3-3 Class B Class A Complies Electromagnetic environment – guidance RF energy is used only to maintain device’s operation.
Appendix Recommended separation distances between portable and mobile RF communication equipment and the device. The device is intended for use in an electromagnetic environment where radiated RF disturbances are under control. User can help prevent electromagnetic interference by keeping the device at a minimum distance from portable and mobile RF communications equipment (transmitters).
Blood Pressure Diary Date: □Before □After Time: Systolic / Diastolic: Date: Pulse: □Before □After Time: Systolic / Diastolic: Date: □Before □After Time: □Before □After Time: □Before □After Time: □Before □After Time: □Before □After Time: □Before □After Time: □Before □After Time: Meal Pulse: □Before □After Time: Systolic / Diastolic: P/N:XXXXXXXXX Meal Pulse: Systolic / Diastolic: Date: Meal Pulse: Systolic / Diastolic: Date: Meal Pulse: Systolic / Diastolic: Date: Meal P