User's Manual

17
Features
 Bluetooth Data Transmission
HL858CB features a built-in “Bluetooth Data Transmission” function, which
enables the device automatically transmit measuring results to paired
Bluetooth device.
Bluetooth compatibility with blood pressure monitor for Bluetooth-enabled
device is:
 Bluetooth 4.0 for Android 4.3 or above,
 Bluetooth 4.0 foriOS 5.0 or above
*Note！
 HL858CB is subject to and complies with electromagnetic compatibility
(EMC) standard of IEC 60601-1-2,EN 301 489-1, EN 301489-3, EN 302
291 andU.S. federal guidelines, Part 15 of the FCC (Federal
Communications Commission) rules for devices with RF capability. These
guidelines help ensure that your device will not affect the operation of
other nearby devices. Additionally, other devices should not affect the use
of your device.
 Other wireless devices that are in use nearby, such as a cell or mobile
phone, or a wireless network, may prevent or delay the transmission of
data from your device to paired Bluetooth device. Moving away from the
source of the interference or turning off these devices to resolve the
problem.
 Make sure HL858CB and paired Bluetooth device are within acceptable
distance (no more than 10 meters) with each other. If not, put them
closer.
 If you plan to transmit test results to paired Bluetooth device, be sure to
select User 1, or 2before measurements, in case other people’s results
may be transmitted to your paired Bluetooth device or included in your
past results.
About Bluetooth Data Transmission Function
The Bluetoothdata transmission function might not be workable to some
Bluetooth devices because of the compatibility of Android system.
Some issuesthat the Bluetooth implementations on these devices have
unresolved errors. It is not because of the Bluetooth module in monitor is not
supported.