User Manual

B. Press button to select the user (see LCD Displays below).

C-1. Start a Single Measurement: (with REST ASSURE MODE on)

1. Make sure the Triple-Check (Multi-Read) function switch turned

off.

2. If REST ASSURE MODE is on, with the cuff wrapped around your

upper arm, press button to start a 5 minutes countdown

(“REST” flash).

3. Time end, all units appear on the screen for 1.5 seconds, and

start the 1

measurement.

4. As the cuff inflates, the monitor automatically determines your

ideal inflation level. This monitor detects your blood pressure

and pulse rate during inflation. The Heartbeat Symbol ( )

flashes at every heartbeat. Remain still and do not move until

the entire measurement process is completed. The device will

detect your pulse and determine the measurement.

*Note

！

 If the cuff does not stop inflating, remove the cuff at once.

 To stop measurement, press button.

The cuff will deflate

immediately after the button is pressed.

Measurement Procedure