User Manual

5. After the monitor has determine your blood pressure and heart

rate, the cuff automatically deflates. Your systolic rate, diastolic

rate, heart rate and corresponding Risk Category Indicator and

Irregular Heartbeat Detector (if any) are displayed with date

and time for 1 minute and save results to memory

automatically.

C-2. Start a Single Measurement: (with REST ASSURE MODE off)

1. Make sure the Triple-Check (Multi-Read) function switch turned

off.

2. If REST ASSURE MODE is off, with the cuff wrapped around your

upper arm, press button to start the measurement. All

display units appear on the screen for 1.5 seconds.

3. As the cuff inflates, the monitor automatically determines your

ideal inflation level. This monitor detects your blood pressure

and pulse rate during inflation. The Heartbeat Symbol ( )

flashes at every heartbeat. Remain still and do not move until

the entire measurement process is completed. The device will

detect your pulse and determine the measurement.

*Note

！

 If the cuff does not stop inflating, remove the cuff at once.

 To stop measurement, press button.

The cuff will deflate

immediately after the button is pressed.

Measurement Procedure

All Se

ments

Measurement result

5 mins countdown