User Manual

27
4. After the monitor has determine your blood pressure and heart
rate, the cuff automatically deflates. Your systolic rate,
diastolic rate, pulse rate and corresponding Risk Category
Indicator and Irregular Heartbeat Detector (if any) are
displayed with date and time for 1 minute and save results to
memory automatically.
D-1. Start a Multi-Measurement: will take continuative 3 times
measurements. (with REST ASSURE MODE on)
1. Make sure the Triple-Check (Multi-Read) function switch turned
on.
2. If REST ASSURE MODE is on, with the cuff wrapped around your
upper arm, press button to start a 5 minutes countdown
(“REST” flash).
3. Time end, all units appear on the screen for 1 second, and start
the 1
st
measurement. (“MEASUREMENT 1” flash while
measuring).
4. After the 1
st
measurement finished, measuring result will not be
showed, and display turned to 1 minute countdown directly
(“REST” flash) for the 2
nd
measurement.
5. Time end, starting the 2
nd
measurement (“MEASUREMENT 2”
flash and “MEASUREMENT 1”non-flash while measuring)
6. After the 2
nd
measurement finished, measuring result will not
be showed, and display turned to 1 minute countdown directly
(“REST” flash) for the 3
rd
measurement.
7. Time end, starting the 3
rd
measurement (“MEASUREMENT 3”
flash and “MEASUREMENT 1 & 2” non-flash while measuring).
Measurement Procedure