User Manual

28
8. As the cuff inflates, the monitor automatically determines your
ideal inflation level. This monitor detects your blood pressure
and pulse rate during inflation. The Heartbeat Symbol ( )
flashes at every heartbeat. Remain still and do not move until
the entire measurement process is completed. The device will
detect your pulse and determine the measurement.
9. After the monitor has determine your blood pressure and pulse
rate, the cuff automatically deflates. Your systolic rate,
diastolic rate, heart rate and corresponding Risk Category
Indicator and Irregular Heartbeat Detector (if any) are
displayed with date and time for 1 minute and save results to
memory automatically.
D-2. Start a Multi-Measurement: will take continuative 3 times
measurements. (with REST ASSURE MODE off)
1. Make sure the Triple-Check (Multi-Read) function switch
turned on.
2. If REST ASSURE MODE is off, with the cuff wrapped around
your upper arm, press button to start the
measurement. All display units appear on the screen for 1.5
seconds, and will automatically start the 1
st
measurement
(“MEASUREMENT 1” flash while measuring).
3. After the 1
st
measurement finished, measuring result will
not be showed, and display turned to 1 minute countdown
directly (“REST” flash) for the 2
nd
measurement.
4. Time end, starting the 2
nd
measurement (“MEASUREMENT 2”
flash and “MEASUREMENT 1” non-flash while measuring).
Measurement Procedure