User Manual

29
5. After the 2
nd
measurement finished, measuring result will
not be showed, and display turned to 1 minute countdown
directly (“REST” flash) for the 3
rd
measurement.
6. Time end, starting the 3
rd
measurement (“MEASUREMENT 3”
flash and “MEASUREMENT1 & 2” non-flash while measuring)
7. As the cuff inflates, the monitor automatically determines
your ideal inflation level. This monitor detects your blood
pressure and pulse rate during inflation. The Heartbeat
Symbol ( ) flashes at every heartbeat. Remain still and do
not move until the entire measurement process is
completed. The device will detect your pulse and determine
the measurement.
8. After the monitor has determine your blood pressure and
pulse rate, the cuff automatically deflates. Your systolic rate,
diastolic rate, pulse rate and corresponding Risk Category
Indicator and Irregular Heartbeat Detector (if any) are
displayed with date and time for 1 minute and save results
to memory automatically.
*Note ！
1. Do not inflate the cuff until it is wrapped around your upper arm.
2. Without any operation for 1 minute, device turns to the sleeping mode.
2. To stop measurement, press button.
3. Press M key to memory mode.
4. Press key to Date/ Time Setting Mode.
5. Press to Change User.
6. Press key to stop measurement to Sleeping Mode.
7. Press AM/PM key to display AM/PM average.
Measurement Procedure