User's Manual

A. Press button ("YEAR" flashes). Press or button
to adjust YEAR value.
B. Press button ("MONTH" flashes). Use or button
to adjust MONTH (1, 2, 3,……, 12).
C. Adjust DATE (1, 2, 3,…, 31), HOUR (1, 2, 3,……..12
PM
,1
PM
,…, 12)
and MINUTE (00,01,02,03,.....59) as described in Step A above.
D. When settings are done, press button to confirm
the settings. The device turns to standby mode.
 Turning Bluetooth Feature ON/OFF
User can press and hold button 3 seconds to turn the
Bluetooth feature ON/OFF in Standby Mode.
B. With the cuff wrapped around your upper arm,
press button to start measurement.
All display units appear on the screen.
After all symbols disappear, the display will show
“00”. The monitor is “Ready to Measure” and will
automatically inflate to the level that is right for
you.
C. After inflation of the cuff, the pressure will
slowly decrease. When pulse is detected,
PULSE SYMBOL flashes.
*Note
！
 If the cuff does not stop inflating, remove the cuff at once.
 To stop measurement, press button. The cuff will deflate immediately
after the button is pressed.
Bluetooth feature ON
Bluetooth feature OFF
 Taking a Measurement
A. Before measurement, press or button to select User 1,
2, or 3.
D. LCD screen displays your
systolic rate, diastolic rate,
pulse, Risk Category Indicator
Bar, and Irregular Heartbeat
Detector symbol (if any) with
date and time for 1 minute.
(Year and Date / Time display
alternate automatically)
E. Without any operation for 1 minute, device automatically shuts
off.
*Note
！
 The Bluetooth Feature Switch default setting is ON

Once Bluetooth Feature turns ON, the LCD appears Bluetooth symbol in any mode.
*Note ！
Do not inflate the cuff until it is wrapped around your upper arm.
Measurement Procedure
Measurement Procedure

Switch on the Monitor
A. Press
button to switch on the monitor.
B. All segments appear on the screen.
 Setting Year, Date and Time
19 20