User's Manual

 Storing data
After each measurement, the systolic and diastolic pressure, heart
rate, pulse, Risk Category Indicator Bar, and Irregular Heartbeat
Detector symbol (if any) with date and time will be automatically
stored.
The monitor can store up to 120 memories for 3 users, and
automatically replace the oldest data with new one.
Bluetooth Communication
To actually perform the Bluetooth Communication, please follow above
steps:
1. To activate Bluetooth function, please make
sure your Bluetooth device have downloaded
the software application (DailyChek
®
), and
follow pairing instruction.
2. Turn on Bluetooth function of your Bluetooth
device beforehand (For example: mobile
phone).
3. When connection established, HL858DC will
light Bluetooth indicator if it’s in a reachable
range (no more than 10 meters) with each other.
Bluetooth Indicator
lit constantly
 Recalling data
A. Press or button to select User 1, 2, or 3.
B. Press M button to enter Memory Mode.
LCD displays average of last 3 measuring results
first.
C. Press M button again, LCD displays the latest
measuring result. Use or button to
scroll through all stored measuring results.
(Year and Date / Time display alternate
automatically)
D. To stop reading memories, press button,
and switch to Standby Mode.
 Erasing data
A. Press or button to select User 1, 2, or 3.
B. Press M button to enter Memory Mode.
A. Date/Time, Measurement and User
Selection Synchronization
The BPM’s Date/Time Setting and User Selection can be synchronized by
Bluetooth device which have downloaded the software application.
To start measurement, please follow below steps:
1. The BPM press button to taking measurement.
2. The BPM and the Bluetooth device display the current cuff pressure
simultaneously.
3. When measurement completed, the BPM displays measurement
result, and the Bluetooth device display the same result as BPM.
B. Memory Delete
To delete User (1, 2, or 3) memory data or all memory
data in the BPM; you may use Bluetooth device which
have downloaded the software application to
complete the deletion.
C. History Data Transmission
Under Standby Mode, the BPM received the request
from Bluetooth device, and the BPM will transmit history data in memory
to Bluetooth device.
Please retry the above steps to transmit history data to other Bluetooth
device.
C. Press and hold and buttons at the same
time, the data will be erased automatically.
D. To confirm the data in the selected user has been erased, press
M button and no data should appear.
Note: Once deleted, your data can NOT be restored.
Memory Function
*Note ！
 Without any operation in 1 minute, the device shuts off automatically
and Bluetooth Transmission OFF.
 Standby Mode: Segments appeared, but not under BPM measuring or
data transmitting.
 Sleeping Mode: Clear all LCD segments.
 HL858DC can only pair up with one Bluetooth device at a time.
21 22